You are here: Home > CLI Commands > Just_CLI_Topics > show valid-network-oui-profile

show valid-network-oui-profile

show valid-network-oui-profile

Description

This command displays the Valid Equipment OUIOrganizationally Unique Identifier. Synonymous with company ID or vendor ID, an OUI is a 24-bit, globally unique assigned number, referenced by various standards. The first half of a MAC address is OUI. Profile table

Syntax

No parameters

Usage Guidelines

If you used the valid-networkoui-profile to add a new OUIOrganizationally Unique Identifier. Synonymous with company ID or vendor ID, an OUI is a 24-bit, globally unique assigned number, referenced by various standards. The first half of a MAC address is OUI. to the controller, issue the show valid-network-oui-profile command to see a list of current OUIs.

Example

(Host) (config) #show valid-network-oui-profile

 

Valid Equipment OUI profile

---------------------------

Parameter Value

--------- -----

OUI 00:1A:1E

Related Commands

Command

Description

valid-network-oui-profile

This command allows you to add a new OUIOrganizationally Unique Identifier. Synonymous with company ID or vendor ID, an OUI is a 24-bit, globally unique assigned number, referenced by various standards. The first half of a MAC address is OUI. to the managed device.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable and Config mode on Mobility Master.

/*]]>*/