You are here: Home > CLI Commands > Just_CLI_Topics > show vpdn l2tp configuration

show vpdn l2tp configuration

show vpdn l2tp configuration

Description

Displays the VPNVirtual Private Network. VPN enables secure access to a corporate network when located remotely. It enables a computer to send and receive data across shared or public networks as if it were directly connected to the private network, while benefiting from the functionality, security, and management policies of the private network. This is done by establishing a virtual point-to-point connection through the use of dedicated connections, encryption, or a combination of the two. L2TPLayer-2 Tunneling Protocol. L2TP is a networking protocol used by the ISPs to enable VPN operations. tunnel configuration.

Syntax

No parameters.

Example

The output of this command shows the L2TPLayer-2 Tunneling Protocol. L2TP is a networking protocol used by the ISPs to enable VPN operations. tunnel configuration.

 

(host) # show vpdn l2tp configuration

 

Enabled

Hello timeout: 30 seconds

DNS primary server: 10.16.15.1

DNS secondary server: 10.16.14.1

WINS primary server: 0.0.0.0

WINS secondary server: 0.0.0.0

PPP client authentication methods:

PAP

IP LOCAL POOLS:

vpnpool: 10.16.15.150 - 10.16.15.160

Related Commands

Command

Description

vpdn group l2tp

This command configures an L2TPLayer-2 Tunneling Protocol. L2TP is a networking protocol used by the ISPs to enable VPN operations. or IPsecInternet Protocol security. IPsec is a protocol suite for secure IP communications that authenticates and encrypts each IP packet in a communication session. VPNVirtual Private Network. VPN enables secure access to a corporate network when located remotely. It enables a computer to send and receive data across shared or public networks as if it were directly connected to the private network, while benefiting from the functionality, security, and management policies of the private network. This is done by establishing a virtual point-to-point connection through the use of dedicated connections, encryption, or a combination of the two. connection.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable and Config mode on Mobility Master and managed devices.

/*]]>*/