You are here: Home > CLI Commands > Just_CLI_Topics > show vpdn pptp configuration

show vpdn pptp configuration

show vpdn pptp configuration

Description

Displays the PPTPPoint-to-Point Tunneling Protocol. PPTP is a method for implementing virtual private networks. It uses a control channel over TCP and a GRE tunnel operating to encapsulate PPP packets. configuration on the controller.

Syntax

No parameters.

Example

The output of this command shows the L2TPLayer-2 Tunneling Protocol. L2TP is a networking protocol used by the ISPs to enable VPN operations. tunnel configuration.

 

(host) # show vpdn pptp configuration

 

Enabled

Hello timeout: 30 seconds

DNS primary server: 10.15.1.1

DNS secondary server: 10.15.1.200

WINS primary server: 0.0.0.0

WINS secondary server: 0.0.0.0

PPP client authentication methods:

MSCHAP

MSCHAPv2

MPPE Configuration

128 bit encryption enabled

IP LOCAL POOLS

Related Commands

Command

Description

vpdn group pptp

This command configures a PPTPPoint-to-Point Tunneling Protocol. PPTP is a method for implementing virtual private networks. It uses a control channel over TCP and a GRE tunnel operating to encapsulate PPP packets. VPNVirtual Private Network. VPN enables secure access to a corporate network when located remotely. It enables a computer to send and receive data across shared or public networks as if it were directly connected to the private network, while benefiting from the functionality, security, and management policies of the private network. This is done by establishing a virtual point-to-point connection through the use of dedicated connections, encryption, or a combination of the two. connection.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Available in Enable and Config modes on Mobility Master and managed devices.

/*]]>*/