You are here: Home > CLI Commands > Just_CLI_Topics > show whitelist-db cpsec-master-switch-list

show whitelist-db cpsec-master-switch-list

show cpsec-master-ctlr-list-db cpsec

show whitelist-db cpsec-master-switch-list [mac-address <mac-address>]

Description

Display the master switch list whitelist on managed devices with APs using the control plane security feature.

Syntax

Parameter

Description

mac-address <mac-address>

MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address of Mobility Master.

Usage Guidelines

When you use the control plane feature on a network with both Mobility Master and managed devices, each managed device has a master switch whitelist which contains the IP and MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. addresses of Mobility Master. If your network has a redundant Mobility Master, then this whitelist will contain more than one entry.

To view information for a single Mobility Master, use the command show whitelist-db cpsec-master-switch-list mac-address <mac-address>. To view a list of all Mobility Masters, use the command show whitelist-db cpsec-master-switch-list.

Example

The following command shows that the managed devices have a single Mobility Master with the IP address 10.3.53.3:

(host) #show whitelist-db cpsec-master-list

Registered Master Switch Details

--------------------------------

Active MAC-Address IP-Address Sequence Number Remote Sequence Number NULL Update Count

------ ----------- ---------- --------------- ---------------------- -----------------

1 00:0b:86:61:ed:6c 10.3.53.11 1 3 1

Local Purge Remote Purge Remote Last-Seq Last Update Sent Last Update Received

----------- ------------ --------------- ---------------- --------------------

0 0 1 Tue Aug 2 13:33:29 2012 Tue Aug 2 13:33:18 2012

The output of this command includes

Syntax

Parameter

Description

MAC-Address

MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address of Mobility Master.

IP-Address

IP address of Mobility Master.

Sequence Number

The number of times Mobility Master in the whitelist received and acknowledged a campus APCampus APs are used in private networks where APs connect over private links (LAN, WLAN, WAN or MPLS) and terminate directly on controllers. Campus APs are deployed as part of the indoor campus solution in enterprise office buildings, warehouses, hospitals, universities, and so on. whitelist change from the managed device. In the example above, Mobility Master received and acknowledged one campus APCampus APs are used in private networks where APs connect over private links (LAN, WLAN, WAN or MPLS) and terminate directly on controllers. Campus APs are deployed as part of the indoor campus solution in enterprise office buildings, warehouses, hospitals, universities, and so on. whitelist change from the managed device.

Remote Sequence Number

The number of times that the managed device has received and acknowledged a campus APCampus APs are used in private networks where APs connect over private links (LAN, WLAN, WAN or MPLS) and terminate directly on controllers. Campus APs are deployed as part of the indoor campus solution in enterprise office buildings, warehouses, hospitals, universities, and so on. whitelist change from the Mobility Master in the whitelist. In the example above, the managed device received and acknowledged three campus APCampus APs are used in private networks where APs connect over private links (LAN, WLAN, WAN or MPLS) and terminate directly on controllers. Campus APs are deployed as part of the indoor campus solution in enterprise office buildings, warehouses, hospitals, universities, and so on. whitelist updates from Mobility Master.

Null Update Count

The number of times the managed device has checked its control plane security whitelist and found nothing to synchronize with Mobility Master. By default, the managed device compares its control plane security whitelist against whitelists on other managed devices every minute. If the null update count reaches 5, the managed device will send an “empty sync” heartbeat to the remote managed device to ensure the sequence numbers on both managed devices are the same, then reset the null update count to zero.

Related Commands

Command

Description

whitelist-db cpsec-master-switch-list

Configure the Mobility Master whitelist for the control plane security feature.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platform

License

Command Mode

All platforms

Base operating system.

Config mode on Mobility Master.

/*]]>*/