You are here: Home > CLI Commands > Just_CLI_Topics > show whitelist-db cpsec-seq

show whitelist-db cpsec-seq

show whitelist-db cpsec-seq

Description

Display the current sequence number for the Mobility Master or managed device whitelists.

Syntax

No Parameters

Usage Guidelines

The current sequence number in the Sequence Number Details table shows the number of changes to the campus APCampus APs are used in private networks where APs connect over private links (LAN, WLAN, WAN or MPLS) and terminate directly on controllers. Campus APs are deployed as part of the indoor campus solution in enterprise office buildings, warehouses, hospitals, universities, and so on. whitelist made on this managed device.

Each managed device compares its campus APCampus APs are used in private networks where APs connect over private links (LAN, WLAN, WAN or MPLS) and terminate directly on controllers. Campus APs are deployed as part of the indoor campus solution in enterprise office buildings, warehouses, hospitals, universities, and so on. whitelist against whitelists on other managed devices every two minutes. If a managed device detects a difference, it will send its changes to the other managed devices on the network. If all other managed devices on the network have successfully received and acknowledged all whitelist changes made on this managed device, every entry in the sequence number column in the managed device whitelist will have the same value as the number displayed in the Sequence Number Details table. If a managed device in the Mobility Master or managed device whitelist has a lower sequence number, that managed device may still be waiting to complete its update, or its update acknowledgement may not have yet been received.

Example

The output of the first command below shows that the campus APCampus APs are used in private networks where APs connect over private links (LAN, WLAN, WAN or MPLS) and terminate directly on controllers. Campus APs are deployed as part of the indoor campus solution in enterprise office buildings, warehouses, hospitals, universities, and so on. whitelist has been updated 3 times on Mobility Master. The second command shows the managed device list on Mobility Master, and verifies that both managed devices have received and acknowledged all three of these changes.

(host) #show whitelist-db cpsec-seq

Sequence Number Details

-----------------------

Table Name Current Seq Number

---------- ------------------

cpsec_whitelist 3

 

Whitelist Entries: 97

 

(host) # show whitelist-db cpsec-local-list

Registered Local Controller Details

-----------------------------------

MAC-Address IP-Address Sequence Number Remote Sequence Number NULL Update Count

----------- ---------- --------------- ---------------------- -----------------

00:0b:86:51:a5:4c 10.3.53.2   3 1 0

00:A0:C9:14:C8:29 10.3.53.4   3 0 0

 

Whitelist Entries: 2

Related Commands

Command

Description

whitelist-db cpsec add mac-address <name>

Configure the campus APCampus APs are used in private networks where APs connect over private links (LAN, WLAN, WAN or MPLS) and terminate directly on controllers. Campus APs are deployed as part of the indoor campus solution in enterprise office buildings, warehouses, hospitals, universities, and so on. whitelist for the control plane security feature.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platform

License

Command Mode

All platforms

Base operating system.

Enable and Config mode on Mobility Master.

/*]]>*/