You are here: Home > CLI Commands > Just_CLI_Topics > show whitelist-db cpsec-status

show whitelist-db cpsec-status

show whitelist-db cpsec-status

[lms-list]

Description

Display aggregate status information APs in the campus APCampus APs are used in private networks where APs connect over private links (LAN, WLAN, WAN or MPLS) and terminate directly on controllers. Campus APs are deployed as part of the indoor campus solution in enterprise office buildings, warehouses, hospitals, universities, and so on. whitelist.

Syntax

Parameter

Description

lms-list

Displays a list of LMSLocal Management Switch. In multi-controller networks, each controller acts as an LMS and terminates user traffic from the APs, processes, and forwards the traffic to the wired network. IP addresses.

Example

The output of the following command shows current status information for all APs in the campus APCampus APs are used in private networks where APs connect over private links (LAN, WLAN, WAN or MPLS) and terminate directly on controllers. Campus APs are deployed as part of the indoor campus solution in enterprise office buildings, warehouses, hospitals, universities, and so on. whitelist:

(host) #show whitelist-db cpsec-status

 

My Mac-Address 00:1a:1e:00:89:b8 My IP-Address 192.0.2.1 Master IP-Address 192.0.2.1 Switch-Role Master Whitelist-sync is enabled

 

Entries in Whitelist database

 

Total entries: 41

Approved entries: 0

Unapproved entries:  0

Certified entries: 40

Certified hold entries:  0

Revoked entries:  1

Marked for deletion entries:  0

Current Sequence Number: 0

Related Commands

Command

Description

whitelist-db cpsec add

Add an AP entry to the campus APCampus APs are used in private networks where APs connect over private links (LAN, WLAN, WAN or MPLS) and terminate directly on controllers. Campus APs are deployed as part of the indoor campus solution in enterprise office buildings, warehouses, hospitals, universities, and so on. whitelist.

whitelist-db cpsec delete

Remove an individual AP entry to the campus APCampus APs are used in private networks where APs connect over private links (LAN, WLAN, WAN or MPLS) and terminate directly on controllers. Campus APs are deployed as part of the indoor campus solution in enterprise office buildings, warehouses, hospitals, universities, and so on. whitelist.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platform

License

Command Mode

All platforms

Base operating system.

Enable and Config mode on Mobility Master.

/*]]>*/