You are here: Home > CLI Commands > Just_CLI_Topics > show whitelist-db rap-master-switch-list

show whitelist-db rap-master-switch-list

show whitelist-db rap-local-switch-list [mac-address <mac-address>]

Description

Display the remote APRemote APs extend corporate network to the users working from home or at temporary work sites. Remote APs are deplyed at branch office sites and are connected to the central network on a WAN link. whitelist master switch list on managed devices with remote APsRemote APs extend corporate network to the users working from home or at temporary work sites. Remote APs are deplyed at branch office sites and are connected to the central network on a WAN link.

Syntax

Parameter

Description

mac-address <mac-address>

MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address of the managed device whose data you want to view.

Usage Guidelines

When your network has with both master and managed devices, each managed device with associated remote APsRemote APs extend corporate network to the users working from home or at temporary work sites. Remote APs are deplyed at branch office sites and are connected to the central network on a WAN link. has a master switch whitelist which contains the IP and MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. addresses of Mobility Master. If your network has a redundant Mobility Master, then this whitelist will contain more than one entry.

To view information for a single Mobility Master, use the command show whitelist-db rap-master-switch-list mac-address <mac-address>. To view a list of all Mobility Masters, use the command show whitelist-db rap-master-switch-list.

Example

The following command shows that the managed devices have a single Mobility Master with the IP address 192.0.2.143. The output in the example below has been divided into sections to better fit on the pages of this document. In the ArubaOS CLICommand-Line Interface. A console interface with a command line shell that allows users to execute text input as commands and convert these commands to appropriate functions., the output appears in a single, long table.

Active MAC-Address IP-Address Sequence Number Remote Sequence

Number

------- ----------- ---------- --------------- ---------------

1 00:0b:86:51:a5:4c 192.0.2.14 2 2

 

NULL Update Count Local Purge Remote Purge Remote Last-Seq Last Update Sent

----------------- ----------- ------------ --------------- ----------------

0 0 0 1 Mon May 4 12:44:24

0

 

Last Update Received

--------------------

Mon May 4 12:44:20

 

Whitelist Entries: 1

The output of this command includes the following information:

Parameter

Description

Active

Shows if the controller is active on the network.

1: Active

0: Inactive

MAC-Address

MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address of Mobility Master.

IP-Address

IP address of Mobility Master.

Sequence Number

The number of times the Mobility Master in the whitelist received and acknowledged a remote APRemote APs extend corporate network to the users working from home or at temporary work sites. Remote APs are deplyed at branch office sites and are connected to the central network on a WAN link. whitelist change from the managed device. In the example above, the Mobility Masters received and acknowledged three remote APRemote APs extend corporate network to the users working from home or at temporary work sites. Remote APs are deplyed at branch office sites and are connected to the central network on a WAN link. whitelist changes sent from a managed device.

Remote Sequence Number

The number of times that the managed device has received and acknowledged a remote APRemote APs extend corporate network to the users working from home or at temporary work sites. Remote APs are deplyed at branch office sites and are connected to the central network on a WAN link. whitelist change from the Mobility Master in the whitelist.

Null Update Count

The number of times the managed device has checked its remote APRemote APs extend corporate network to the users working from home or at temporary work sites. Remote APs are deplyed at branch office sites and are connected to the central network on a WAN link. whitelist and found nothing to synchronize with the remote managed device. By default, the managed device compares its remote APRemote APs extend corporate network to the users working from home or at temporary work sites. Remote APs are deplyed at branch office sites and are connected to the central network on a WAN link. whitelist against whitelists on other managed devices every minute. If the null update count reaches 5, the managed device will send an “empty sync” heartbeat to the remote managed device to ensure the sequence numbers on both managed devices are the same, then reset the null update count to zero.

Related Commands

Command

Description

whitelist-db rap-local-switch-list

Delete a managed device from the local switch table used by the remote APRemote APs extend corporate network to the users working from home or at temporary work sites. Remote APs are deplyed at branch office sites and are connected to the central network on a WAN link. whitelist

whitelist-db rap del

Remove an AP entry from the remote APRemote APs extend corporate network to the users working from home or at temporary work sites. Remote APs are deplyed at branch office sites and are connected to the central network on a WAN link. whitelist.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platform

License

Command Mode

All platforms

Base operating system.

Enable and Config mode on Mobility Master.

/*]]>*/