You are here: Home > CLI Commands > Just_CLI_Topics > show wlan dot11k-profile

show wlan dot11k-profile

show wlan dot11k-profile [<profile>]

Description

Show a list of all 802.11k802.11k is an IEEE standard that enables APs and client devices to discover the best available radio resources for seamless BSS transition in a WLAN. profiles, or display detailed configuration information for a specific 802.11k802.11k is an IEEE standard that enables APs and client devices to discover the best available radio resources for seamless BSS transition in a WLAN. profile.

Syntax

Parameter

Description

<profile>

Name of an 802.11k802.11k is an IEEE standard that enables APs and client devices to discover the best available radio resources for seamless BSS transition in a WLAN. profile.

Usage Guidelines

Issue this command without the <profile> parameter to display the 802.11k802.11k is an IEEE standard that enables APs and client devices to discover the best available radio resources for seamless BSS transition in a WLAN. profile list, including profile status and the number of references to each profile. Include a profile name to display detailed configuration information for that profile.

Examples

The example below shows that the controller has two configured 802.11k802.11k is an IEEE standard that enables APs and client devices to discover the best available radio resources for seamless BSS transition in a WLAN. profiles. The References column lists the number of other profiles with references to the 802.11k802.11k is an IEEE standard that enables APs and client devices to discover the best available radio resources for seamless BSS transition in a WLAN. profile, and the Profile Status column indicates whether the profile is predefined. (User-defined profiles will not have an entry in the Profile Status column.)

(host) #show wlan dot11k-profile

 

802.11K Profile List

--------------------

Name References Profile Status

---- ---------- --------------

default 8

11kprofile2 1

Total: 2

The following example shows configuration settings defined for the profile default.

(host) #show wlan dot11k-profile default

 

802.11K Profile "default"

-------------------------

Parameter Value

--------- -----

Advertise 802.11K Capability Disabled

Forcefully disassociate on-hook voice clients Disabled

Measurement Mode for Beacon Reports beacon-table

Configure specific channel for Beacon Requests Disabled

Channel requested for Beacon Reports in 'A' band 36

Channel requested for Beacon Reports in 'BG' band 1

Time duration between consecutive Beacon Requests 60 sec

Time duration between consecutive Link Measurement Requests 60 sec

Time duration between consecutive Transmit Stream Measurement Requests 90 sec

The output of this command includes the following data columns:

Parameter

Description

Advertise 802.11K Capability

Shows if the profile has enabled or disabled the 802.11K feature.

Forcefully disassociate on-hook voice clients

If enabled, the AP may forcefully disassociate clients that reach the maximum CACCall Admission Control. CAC regulates traffic volume in voice communications. CAC can also be used to ensure or maintain a certain level of audio quality in voice communications networks. peak capacity or call handoff reservation.

Measurement Mode for Beacon Reports

Shows the profile’s beacon measurement mode:

active: In this mode, the client sends a probe request to the broadcast destination address on all supported channels, sets a measurement duration timer, and, at the end of the measurement duration, compiles all received beacons or probe response with the requested SSIDService Set Identifier. SSID is a name given to a WLAN and is used by the client to access a WLAN network. and BSSIDBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly. into a measurement report.

beacon-table: In this mode, the client measures beacons and returns a report with stored beacon information for any supported channel with the requested SSIDService Set Identifier. SSID is a name given to a WLAN and is used by the client to access a WLAN network. and BSSIDBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly.. The client does not perform any additional measurements. This is the default beacon measurement mode.

passive: In this mode, the client sets a measurement duration timer, and, at the end of the measurement duration, compiles all received beacons or probe response with the requested SSIDService Set Identifier. SSID is a name given to a WLAN and is used by the client to access a WLAN network. and BSSIDBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly. into a measurement report.

 

Related Commands

Command

Description

wlan dot11k-profile

Configure a 802.11k802.11k is an IEEE standard that enables APs and client devices to discover the best available radio resources for seamless BSS transition in a WLAN. radio profile.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Available in Enable and Config modes on Mobility Master and managed devices.

/*]]>*/