You are here: Home > CLI Commands > Just_CLI_Topics > show wlan anyspot-profile

show wlan anyspot-profile

show wlan anyspot-profile [<profile-name>]

Description

The output of this command displays configuration settings for a WLANWireless Local Area Network. WLAN is a 802.11 standards-based LAN that the users access through a wireless connection. anyspot profile.

Syntax

Parameter

Description

<profile>

Name of an anyspot profile.

Usage Guidelines

The anyspot client probe suppression feature decreases network traffic by suppressing probe requests from clients attempting to locate and connect to other known networks. Issue this command without the <profile> parameter to display the entire anyspot profile list, including profile status and the number of references to each profile. Include a profile name to display detailed configuration information for that profile.

Example

The following command displays configuration information for an active (enabled) anyspot profile with two excluded ESSIDsExtended Service Set Identifier. ESSID refers to the ID used for identifying an extended service set., and one preset ESSIDExtended Service Set Identifier. ESSID refers to the ID used for identifying an extended service set..

Anyspot profile "default"

-------------------------

Parameter Value

--------- -----

Enable Anyspot true

Exclude ESSID(s) (exact match) corp_dev_1

Exclude ESSID(s) (exact match) corp_voip_1

Exclude ESSID(s) (containing string(s)) N/A

Preset ESSID(s) corpGuest

Parameter

Description

enable-anyspot

Indicates if the anyspot feature is enabled or disabled.

exclude-essidExtended Service Set Identifier. ESSID refers to the ID used for identifying an extended service set. <exclude-essid>Extended Service Set Identifier. ESSID refers to the ID used for identifying an extended service set.

An anyspot-enabled radio will not respond to client probe requests using an ESSIDExtended Service Set Identifier. ESSID refers to the ID used for identifying an extended service set. in the Exclude ESSID lists. ESSIDsExtended Service Set Identifier. ESSID refers to the ID used for identifying an extended service set. from neighboring APs will automatically appear in this list as long as the anyspot-enabled AP can detect that ESSIDExtended Service Set Identifier. ESSID refers to the ID used for identifying an extended service set..

exclude-wildcard <exclude-wildcard>

An anyspot-enabled radio will not respond to client probe requests using an ESSIDExtended Service Set Identifier. ESSID refers to the ID used for identifying an extended service set. that matches a string in the Exclude ESSID (containing string) list.

preset-essidExtended Service Set Identifier. ESSID refers to the ID used for identifying an extended service set. <preset-essid>Extended Service Set Identifier. ESSID refers to the ID used for identifying an extended service set.

If a client sends a probe request without an ESSIDExtended Service Set Identifier. ESSID refers to the ID used for identifying an extended service set. (that is, the probe request is not looking for a specific network) then the anyspot-enabled AP will respond to the probe request with an ESSIDExtended Service Set Identifier. ESSID refers to the ID used for identifying an extended service set. from this list.

Related Commands

Command

Description

wlan anyspot-profile

The anyspot client probe suppression feature decreases network traffic by suppressing probe requests from clients attempting to locate and connect to other known networks.

Command History

Version

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Enable and Config mode on Mobility Master.

/*]]>*/