You are here: Home > CLI Commands > Just_CLI_Topics > show wlan hotspot h2qp-conn-capability-profile

show wlan hotspot h2qp-conn-capability-profile

show wlan hotspot h2qp-conn-capability-profile [<profile>]

Description

The output of this command displays settings for a WLANWireless Local Area Network. WLAN is a 802.11 standards-based LAN that the users access through a wireless connection. H2QPHotspot 2.0 Query Protocol. connection capability profile.

Syntax

Parameter

Description

<profile>

Name of H2QPHotspot 2.0 Query Protocol. connection capability profile

Usage Guidelines

The values configured in this profile can be sent in an ANQPAccess Network Query Protocol. ANQP is a query and a response protocol for Wi-Fi hotspot services. ANQP includes information Elements (IEs) that can be sent from the AP to the client to identify the AP network and service provider. The IEs typically include information about the domain name of the AP operator, the IP addresses available at the AP, and information about potential roaming partners accessible through the AP. If the client responds with a request for a specific IE, the AP will send a Generic Advertisement Service (GAS) response frame with the configured ANQP IE information. IE to provide hotspotHotspot refers to a WLAN node that provides Internet connection and virtual private network (VPN) access from a given location. A business traveler, for example, with a laptop equipped for Wi-Fi can look up a local hotspot, contact it, and get connected through its network to reach the Internet. clients information about the IP protocols and associated port numbers that are available and open for communication.

Values configured in this profile will not be sent to clients unless you:

1. Associate the H2QPHotspot 2.0 Query Protocol. profile with an ANQPAccess Network Query Protocol. ANQP is a query and a response protocol for Wi-Fi hotspot services. ANQP includes information Elements (IEs) that can be sent from the AP to the client to identify the AP network and service provider. The IEs typically include information about the domain name of the AP operator, the IP addresses available at the AP, and information about potential roaming partners accessible through the AP. If the client responds with a request for a specific IE, the AP will send a Generic Advertisement Service (GAS) response frame with the configured ANQP IE information. advertisement profile. (wlan hotspot advertisement profile <profile-name> h2qp-conn-cap-profile <profile-name> )

2. Associate the ANQPAccess Network Query Protocol. ANQP is a query and a response protocol for Wi-Fi hotspot services. ANQP includes information Elements (IEs) that can be sent from the AP to the client to identify the AP network and service provider. The IEs typically include information about the domain name of the AP operator, the IP addresses available at the AP, and information about potential roaming partners accessible through the AP. If the client responds with a request for a specific IE, the AP will send a Generic Advertisement Service (GAS) response frame with the configured ANQP IE information. advertisement profile with a HotspotHotspot refers to a WLAN node that provides Internet connection and virtual private network (VPN) access from a given location. A business traveler, for example, with a laptop equipped for Wi-Fi can look up a local hotspot, contact it, and get connected through its network to reach the Internet. profile. (wlan hotspot h2-profile advertisement-profile <profile-name> )

3. Enable the hotspotHotspot refers to a WLAN node that provides Internet connection and virtual private network (VPN) access from a given location. A business traveler, for example, with a laptop equipped for Wi-Fi can look up a local hotspot, contact it, and get connected through its network to reach the Internet. feature within that HotspotHotspot refers to a WLAN node that provides Internet connection and virtual private network (VPN) access from a given location. A business traveler, for example, with a laptop equipped for Wi-Fi can look up a local hotspot, contact it, and get connected through its network to reach the Internet. profile. (wlan hotspot h2-profile <profile-name> hotspot-enable )

Examples

Issue this command without the optional <profile> parameter to display a list of all configured connection capability profiles. Include the <profile> parameter to display details for a specific profile.

The example below shows that the controller has four configured connection capability profiles. The References column lists the number of other profiles with references to the connection capability profile, and the Profile Status column indicates whether the profile is predefined. User-defined profiles will not have an entry in the Profile Status column.

H2QP Connection Capability Profile List

---------------------------------------

Name References Profile Status

---- ---------- --------------

branch-hotspot-1 6

branch-hotspot-2 5

default 1

downtown-hotspot 1

Total:4

The following example displays the current configuration settings for the default H2QPHotspot 2.0 Query Protocol. connection capability profile.

(host) (config) #show wlan hotspot h2qp-conn-capability-profile default

H2QP Connection Capability Profile "default"

--------------------------------------------

Parameter Value

--------- -----

H2QP Connection Capability ICMP port Disabled

H2QP Connection Capability FTP port(TCP Protocol) Disabled

H2QP Connection Capability SSH port(TCP Protocol) Disabled

H2QP Connection Capability HTTP port(TCP Protocol) Disabled

H2QP Connection Capability TLS VPN port(TCP Protocol) Disabled

H2QP Connection Capability PPTP VPN port(TCP Protocol) Disabled

H2QP Connection Capability VOIP port(TCP Protocol) Disabled

H2QP Connection Capability VOIP port(UDP Protocol) Disabled

H2QP Connection Capability IKEv2 port for IPSec VPN Disabled

H2QP Connection Capability May be used by IKEv2 port for IPSec VPN Disabled

H2QP Connection Capability ESP port(Used by IPSec VPN) Disabled

The output of this command includes the following information:

Parameter

Description

H2QP Connection Capability ICMP port

Shows if the ICMPInternet Control Message Protocol. ICMP is an error reporting protocol. It is used by network devices such as routers, to send error messages and operational information to the source IP address when network problems prevent delivery of IP packets. port is enabled and available. (port 0)

H2QP Connection Capability FTP port

Shows if the FTPFile Transfer Protocol. A standard network protocol used for transferring files between a client and server on a computer network. port is enabled and available. (port 20)

H2QP Connection Capability SSH port

Shows if the SSHSecure Shell. SSH is a network protocol that provides secure access to a remote device. port is enabled and available. (port 22)

H2QP Connection Capability HTTP port

Shows if the HTTPHypertext Transfer Protocol. The HTTP is an application protocol to transfer data over the web. The HTTP protocol defines how messages are formatted and transmitted, and the actions that the w servers and browsers should take in response to various commands. port is enabled and available. (port 80)

H2QP Connection Capability TLS VPN port

Shows if the TCPTransmission Control Protocol. TCP is a communication protocol that defines the standards for establishing and maintaining network connection for applications to exchange data.  TLSTransport Layer Security. TLS is a cryptographic protocol that provides communication security over the Internet. TLS encrypts the segments of network connections above the Transport Layer by using asymmetric cryptography for key exchange, symmetric encryption for privacy, and message authentication codes for message integrity. port used VPNs is enabled and available. (port 80)

H2QP Connection Capability PPTP VPN port

Shows if the PPTPPoint-to-Point Tunneling Protocol. PPTP is a method for implementing virtual private networks. It uses a control channel over TCP and a GRE tunnel operating to encapsulate PPP packets. port used by IPsecInternet Protocol security. IPsec is a protocol suite for secure IP communications that authenticates and encrypts each IP packet in a communication session. VPNs is enabled and available. (port 1723)

H2QP Connection Capability VoIP port (UDP)

Shows if the UDPUser Datagram Protocol. UDP is a part of the TCP/IP family of protocols used for data transfer. UDP is typically used for streaming media. UDP is a stateless protocol, which means it does not acknowledge that the packets being sent have been received. VoIPVoice over IP. VoIP allows transmission of voice and multimedia content over an IP network. port is enabled and available. (port 5060)

H2QP Connection Capability VoIP port (TCP)

Shows if the TCPTransmission Control Protocol. TCP is a communication protocol that defines the standards for establishing and maintaining network connection for applications to exchange data. VoIPVoice over IP. VoIP allows transmission of voice and multimedia content over an IP network. port is enabled and available. (port 5060)

H2QP Connection Capability IKEv2 port

for IPSec VPN

Shows if the IKEv2Internet Key Exchange version 2. IKEv2 uses the secure channel established in Phase 1 to negotiate Security Associations on behalf of services such as IPsec. IKEv2 uses pre-shared key and Digital Signature for authentication. See RFC 4306. port 4500 is enabled and available

H2QP Connection Capability May

be used by IKEv2 port for IPSec VPN

Shows if the IKEv2Internet Key Exchange version 2. IKEv2 uses the secure channel established in Phase 1 to negotiate Security Associations on behalf of services such as IPsec. IKEv2 uses pre-shared key and Digital Signature for authentication. See RFC 4306. port 500 is enabled and available

H2QP Connection Capability ESP port

(Used by IPSec VPN)

Shows if the ESP port used by IPsecInternet Protocol security. IPsec is a protocol suite for secure IP communications that authenticates and encrypts each IP packet in a communication session. VPNs is enabled and available. (port 0)

Related Commands

Command

Description

wlan hotspot h2qp-conn-capability-profile

This command defines an H2QPHotspot 2.0 Query Protocol. profile that advertises hotspotHotspot refers to a WLAN node that provides Internet connection and virtual private network (VPN) access from a given location. A business traveler, for example, with a laptop equipped for Wi-Fi can look up a local hotspot, contact it, and get connected through its network to reach the Internet. protocol and port capabilities.

Command History

Version

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Enable and Config mode on Mobility Master.

/*]]>*/