You are here: Home > CLI Commands > Just_CLI_Topics > show wlan hotspot h2qp-op-cl-profile

show wlan hotspot h2qp-op-cl-profile

show wlan hotspot h2qp-op-cl-profile [<profile>]

Description

The output of this command displays settings for a WLANWireless Local Area Network. WLAN is a 802.11 standards-based LAN that the users access through a wireless connection. H2QPHotspot 2.0 Query Protocol. operating class profile.

Syntax

Parameter

Description

<profile>

Name of H2QPHotspot 2.0 Query Protocol. operating class profile

Usage Guidelines

The values configured in this H2QPHotspot 2.0 Query Protocol. Operating Class profile list the channels on which the hotspotHotspot refers to a WLAN node that provides Internet connection and virtual private network (VPN) access from a given location. A business traveler, for example, with a laptop equipped for Wi-Fi can look up a local hotspot, contact it, and get connected through its network to reach the Internet. is capable of operating. It may be useful where, for instance, a mobile device discovers a hotspotHotspot refers to a WLAN node that provides Internet connection and virtual private network (VPN) access from a given location. A business traveler, for example, with a laptop equipped for Wi-Fi can look up a local hotspot, contact it, and get connected through its network to reach the Internet. in the 2.4 GHzGigahertz. bandBand refers to a specified range of frequencies of electromagnetic radiation. but finds it is dual-bandBand refers to a specified range of frequencies of electromagnetic radiation. and prefers the 5 GHzGigahertz. bandBand refers to a specified range of frequencies of electromagnetic radiation..

Examples

Issue this command without the optional <profile> parameter to display a list of all configured connection capability profiles. Include the <profile> parameter to display details for a specific profile.

The example below shows that the controller has two configured operating class profiles. The References column lists the number of other profiles with references to the operating class profile, and the Profile Status column indicates whether the profile is predefined. User-defined profiles will not have an entry in the Profile Status column.

(host)(H2QP Connection Capability Profile "default") #show wlan hotspot h2qp-op-cl-profile

H2QP Operating Class Indication Profile List

--------------------------------------------

Name References Profile Status

---- ---------- --------------

default 0

newopcl 1

Total:2

The following example displays the current configuration setting for the default H2QPHotspot 2.0 Query Protocol. operating class profile.

(host)(H2QP Connection Capability Profile "default") #show wlan hotspot h2qp-op-cl-profile default

H2QP Operating Class Indication Profile "default"

-------------------------------------------------

Parameter Value

--------- -----

H2QP Operating Class(Valid Values 1-255) 1

The output of this command includes the following information:

Parameter

Description

H2QP Operating Class

(Valid Values 1-255)

Displays the current operating class for the devices’ BSSBasic Service Set. A BSS is a set of interconnected stations that can communicate with each other. BSS can be an independent BSS or infrastructure BSS. An independent BSS is an ad hoc network that does not include APs, whereas the infrastructure BSS consists of an AP and all its associated clients. . The supported range for this field is 1-255, and the default value is 1.

Related Commands

Command

Description

wlan hotspot h2qp-op-cl-profile

Use this command to configure WLANWireless Local Area Network. WLAN is a 802.11 standards-based LAN that the users access through a wireless connection. H2QPHotspot 2.0 Query Protocol. operating class profile.

Command History

Version

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Enable and Config mode on Mobility Master.

/*]]>*/