You are here: Home > CLI Commands > Just_CLI_Topics > show wlan hotspot h2qp-operator-friendly-name-profile

show wlan hotspot h2qp-operator-friendly-name-profile

show wlan hotspot h2qp-operator-friendly-name-profile [<profile>]

Description

The output of this command displays settings for a H2QPHotspot 2.0 Query Protocol. operator-friendly name profile.

Syntax

Parameter

Description

<profile>

Name of H2QP operator-friendly name profile.

Usage Guidelines

The operator-friendly name defined in this profile is a free-form text field that can identify the operator and also something about the location.Issue this command without the <profile> parameter to display the entire operator-friendly name profile list, including profile status and the number of references to each profile. Include a profile name to display detailed configuration information for that profile.

Examples

The example below shows that the controller has two configured operator-friendly name profiles. The References column lists the number of other profiles with references to the operator-friendly name profile, and the Profile Status column indicates whether the profile is predefined. User-defined profiles will not have an entry in the Profile Status column.

(host)(config)# show wlan hotspot h2qp-operator-friendly-name-profile

H2QP Operator Friendly Name Profile List

----------------------------------------

Name References Profile Status

---- ---------- --------------

default 0

operator1 8

Total:2

The following example displays the configuration settings for the profile operator1.

(host) (H2QP Operator Friendly Name Profile "operator1") #show wlan hotspot h2qp-operator-friendly-name-profile operator1

H2QP Operator Friendly Name Profile "operator1"

-----------------------------------------------

Parameter Value

--------- -----

Operator Friendly Name Language Code eng

Operator Friendly Name CoffeeHouseGuest

The output of this command includes the following parameters:

Parameter

Description

Operator Friendly Name Language Code

An ISO 639 language code that identifies the language used in the Operator Friendly Name field.

Operator Friendly Name

An operator-friendly name sent by devices using this profile. The name can be up to 64 alphanumeric characters, and can include special characters and spaces. If the name includes quotation marks (“), you must include a backslash character (\) before each quotation mark. (e.g. \"example\")

Related Commands

Command

Description

ntp

This command defines an H2QPHotspot 2.0 Query Protocol. operator-friendly name profile.

Command History

Version

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Enable and Config mode on Mobility Master.

/*]]>*/