You are here: Home > CLI Commands > Just_CLI_Topics > show wlan hotspot h2qp-wan-metrics-profile

show wlan hotspot h2qp-wan-metrics-profile

show wlan hotspot h2qp-wan-metrics-profile [<profile-name>]

Description

The output of this command displays settings for a H2QPHotspot 2.0 Query Protocol.WANWide Area Network. WAN is a telecommunications network or computer network that extends over a large geographical distance. metrics profile.

Syntax

Parameter

Description

<profile-name>

Name of H2QP WAN metrics profile.

Usage Guidelines

The values configured in this profile can be sent in an ANQPAccess Network Query Protocol. ANQP is a query and a response protocol for Wi-Fi hotspot services. ANQP includes information Elements (IEs) that can be sent from the AP to the client to identify the AP network and service provider. The IEs typically include information about the domain name of the AP operator, the IP addresses available at the AP, and information about potential roaming partners accessible through the AP. If the client responds with a request for a specific IE, the AP will send a Generic Advertisement Service (GAS) response frame with the configured ANQP IE information. IE to provide hotspotHotspot refers to a WLAN node that provides Internet connection and virtual private network (VPN) access from a given location. A business traveler, for example, with a laptop equipped for Wi-Fi can look up a local hotspot, contact it, and get connected through its network to reach the Internet. clients information about access network characteristics such as link status and the capacity and speed of the WANWide Area Network. WAN is a telecommunications network or computer network that extends over a large geographical distance. link to the Internet. Issue this command without the <profile-name> parameter to display the entire WAN metrics profile list, including profile status and the number of references to each profile. Include a profile name to display detailed configuration information for that profile.

Examples

The example below shows that the managed device has two configured WAN metrics profiles. The References column lists the number of other profiles with references to the WAN metrics profile, and the Profile Status column indicates whether the profile is predefined. User-defined profiles will not have an entry in the Profile Status column.

(host) [mynode] (H2QP Connection Capability Profile "default") #show wlan hotspot h2qp-wan-metrics-profile

 

H2QP WAN Metrics Profile List

-----------------------------

Name References Profile Status

---- ---------- --------------

default 0

fastwan 6

Total:2

The following example shows the current configuration settings for the profile 'fastwan':

(host) [mynode] #show wlan hotspot h2qp-wan-metrics-profile fastwan

 

H2QP WAN Metrics Profile "fastwan"

--------------------------------

Parameter Value

--------- -----

H2QP WAN metrics link status link_up

H2QP WAN metrics symmetric WAN link Disabled

H2QP WAN metrics link at capacity Disabled

WAN Metrics uplink speed 1000

WAN Metrics downlink speed 1000

WAN Metrics uplink load 100

WAN Metrics downlink load 100

WAN Metrics load measurement duration 100

The output of this command includes the following information:

Parameter

Description

H2QP WAN metrics link status

Indicates the status of the WAN Link by displaying one of the following values. The default link status is reserved, which indicates that the link status is unknown or unspecified.

link_down

link_test

link_up

reserved

H2QP WAN metrics symmetric WAN link

This parameter indicates if the WAN Link has same speed in both the uplink and downlink directions.

H2QP WAN metrics link
at capacity

This  parameter indicates if the WAN Link has reached its maximum capacity. If this parameter is enabled, no additional mobile devices will be permitted to associate to the hotspot AP.

WAN Metrics uplink speed

This parameter indicates the current WAN backhaul uplink speed in Kbps. If no value is set, this parameter will show a default value of 0 to indicate that the uplink speed is unknown or unspecified.

WAN Metrics down link speed

This parameter indicates the current WANWide Area Network. WAN is a telecommunications network or computer network that extends over a large geographical distance. backhaul downlink speed in KbpsKilobits per second.. If no value is set, this parameter will show a default value of 0 to indicate that the downlink speed is unknown or unspecified.

WAN Metrics uplink load

 

The percentage of the WAN uplink that is currently utilized. If no value is set, this parameter will show a default value of 0 to indicate that the downlink speed is unknown or unspecified.

WAN Metrics downlink load

The percentage of the WANWide Area Network. WAN is a telecommunications network or computer network that extends over a large geographical distance. downlink that is currently utilized. If no value is set, this parameter will show a default value of 0 to indicate that the downlink speed is unknown or unspecified.

WAN Metrics load measurement duration

Duration over which the downlink load is measured, in tenths of a second.

Related Commands

Command

Description

wlan hotspot h2qp-wan-metrics-profile

This command creates an H2QPHotspot 2.0 Query Protocol. profile that specifies the hotspotHotspot refers to a WLAN node that provides Internet connection and virtual private network (VPN) access from a given location. A business traveler, for example, with a laptop equipped for Wi-Fi can look up a local hotspot, contact it, and get connected through its network to reach the Internet. WANWide Area Network. WAN is a telecommunications network or computer network that extends over a large geographical distance. status and link metrics.

Command History

Version

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Config mode on Mobility Master.

/*]]>*/