You are here: Home > CLI Commands > Just_CLI_Topics > show wlan hotspot anqp-nwk-auth-profile

show wlan hotspot anqp-nwk-auth-profile

show wlan hotspot anqp-nwk-auth-profile [<profile-name>]

Description

The output of this command displays settings for a WLANWireless Local Area Network. WLAN is a 802.11 standards-based LAN that the users access through a wireless connection. ANQPAccess Network Query Protocol. ANQP is a query and a response protocol for Wi-Fi hotspot services. ANQP includes information Elements (IEs) that can be sent from the AP to the client to identify the AP network and service provider. The IEs typically include information about the domain name of the AP operator, the IP addresses available at the AP, and information about potential roaming partners accessible through the AP. If the client responds with a request for a specific IE, the AP will send a Generic Advertisement Service (GAS) response frame with the configured ANQP IE information. network authentication profile.

Syntax

Parameter

Description

<profile>

Name of an ANQP Network Authentication profile.

Usage Guidelines

ANQPAccess Network Query Protocol. ANQP is a query and a response protocol for Wi-Fi hotspot services. ANQP includes information Elements (IEs) that can be sent from the AP to the client to identify the AP network and service provider. The IEs typically include information about the domain name of the AP operator, the IP addresses available at the AP, and information about potential roaming partners accessible through the AP. If the client responds with a request for a specific IE, the AP will send a Generic Advertisement Service (GAS) response frame with the configured ANQP IE information. profiles define the 802.11u802.11u is an amendment to the IEEE 802.11 WLAN standards for connection to external networks using common wireless devices such as smartphones and tablet PCs. The 802.11u protocol provides wireless clients with a streamlined mechanism to discover and authenticate to suitable networks, and allows mobile users to roam between partner networks without additional authentication. An 802.11u-capable device supports the Passpoint technology from the Wi-Fi Alliance Hotspot 2.0 R2 Specification that simplifies and automates access to public Wi-Fi. IEs to be broadcast by an 802.11u802.11u is an amendment to the IEEE 802.11 WLAN standards for connection to external networks using common wireless devices such as smartphones and tablet PCs. The 802.11u protocol provides wireless clients with a streamlined mechanism to discover and authenticate to suitable networks, and allows mobile users to roam between partner networks without additional authentication. An 802.11u-capable device supports the Passpoint technology from the Wi-Fi Alliance Hotspot 2.0 R2 Specification that simplifies and automates access to public Wi-Fi. -capable AP. Use this command to select one of each type of ANQPAccess Network Query Protocol. ANQP is a query and a response protocol for Wi-Fi hotspot services. ANQP includes information Elements (IEs) that can be sent from the AP to the client to identify the AP network and service provider. The IEs typically include information about the domain name of the AP operator, the IP addresses available at the AP, and information about potential roaming partners accessible through the AP. If the client responds with a request for a specific IE, the AP will send a Generic Advertisement Service (GAS) response frame with the configured ANQP IE information. profile to be associated with the advertisement profile.

Issue this command without the <profile> parameter to display the entire ANQP network authentication profile list, including profile status and the number of references to each profile. Include a profile name to display detailed configuration information for that profile.

Examples

The example below shows that the controller has two configured network authentication profiles. The References column lists the number of other profiles with references to the network authentication profile, and the Profile Status column indicates whether the profile is predefined. User-defined profiles will not have an entry in the Profile Status column.

(host) # show wlan hotspot anqp-nwk-auth-profile

 

ANQP Network Authentication Profile List

----------------------------------------

Name References Profile Status

---- ---------- --------------

auth1       0

default 0

 

Total:2.

The following example displays the configuration settings for the profile default.

 

(host) #show wlan hotspot anqp-nwk-auth-profile default

 

ANQP Network Authentication Profile "default"

------------------------------------------------

Parameter Value

--------- -----

Type of Network Authentication acceptance

Redirect URL N/A

The output of this command includes the following parameters:

Parameter

Description

Type of Network Authentication

Network Authentication Type being used by the hotspot network. This parameter can be any of the following values:

acceptance: Network requires the user to accept terms and conditions.

dns-redirection: Additional information on the network is provided through DNS redirection.

http-https-redirection : Additional information on the network is provided through HTTP/HTTPS redirection.

online-enroll : Network supports online enrollment.

Redirect URL

If information on the network is provided through DNS redirection, this parameter displays the redirection URL.

Related Commands

Command

Description

wlan hotspot anqp-nwk-auth-profile

This command configures an ANQPAccess Network Query Protocol. ANQP is a query and a response protocol for Wi-Fi hotspot services. ANQP includes information Elements (IEs) that can be sent from the AP to the client to identify the AP network and service provider. The IEs typically include information about the domain name of the AP operator, the IP addresses available at the AP, and information about potential roaming partners accessible through the AP. If the client responds with a request for a specific IE, the AP will send a Generic Advertisement Service (GAS) response frame with the configured ANQP IE information. Network Authentication profile to define authentication type being used by the hotspotHotspot refers to a WLAN node that provides Internet connection and virtual private network (VPN) access from a given location. A business traveler, for example, with a laptop equipped for Wi-Fi can look up a local hotspot, contact it, and get connected through its network to reach the Internet. network.

Command History

Version

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Enable and Config mode on Mobility Master.

/*]]>*/