You are here: Home > CLI Commands > Just_CLI_Topics > show wms client

show wms client

show wms client {list|<mac>|probe <mac>|stats [mon-mac <mon-mac> mac <mac>]|valid-exempt}

Description

This command displays the list of client information for the clients that can be seen by monitoring APs.

Syntax

Parameter

Description

list

Show statistics for all monitored clients.

<mac>

Show statistics for a client with the specified MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address, including the BSSIDBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly. of the AP to which that client is currently associated, and the MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. addresses of other monitoring APs that can see that client.

probe <mac>

Specify a client’s MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address to show the BSSIDsBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly. of all probes that can see that client.

stats

Show the STA stats table, which displays data for all clients seen by each monitoring AP.

mon-mac <mon-mac> mac <mac>

Enter a monitoring AP’s MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address (<mon-mac>) and the MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address of a client (<mac>) to show data for traffic received from and sent to a specific client as seen by a specific AP.

valid-exempt

Shows a list of valid-exempt clients.

Example

The AP Info table in the example below shows that the client is associated to an AP with the BSSIDBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly. 00:0b:86:cd:86:a0. The Probe info table shows the MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. addresses of three other APs that can see the client.

(host) #show wms client 00:0e:35:29:9b:28

 

STA Info

--------

MAC Type Status Ageout HT-Type

--- ---- ------ ------ -------

00:0e:35:29:9b:28 valid up -1 HT-40mhz

 

AP Info

-------

BSSID SSID Channel Type RAP_Type Status Ageout HT-Type HT-Sec-Chan

----- ---- ------- ---- -------- ------ ------ ------- -----------

00:0b:86:cd:86:a0 MySSiD 11 soft-ap valid up -1 HT-40mhz 153

Column

Description

MAC

MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address of the client

Type

Station type (valid, interfering, or disabled rogue client )

Status

If up, the client is active. If down (or no information is shown) the client is inactive.

Ageout

An ageout time is the time, in minutes, that the client must remain unseen by any probes before it is eliminated from the database. If this column displays a -1, the client has not yet aged out. Any other number indicates the number of minutes since the client has passed its ageout interval.

HT-Type

Type of high-throughput traffic sent by the client.

BSSID

BSSIDBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly. of the AP to which the client is associated.

SSID

Extended service set identifier (ESSIDExtended Service Set Identifier. ESSID refers to the ID used for identifying an extended service set.) of the BSSIDBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly..

RAP_Type

Indicates one of the following Rogue AP types:

Valid (not a rogue AP)

Interfering

Rogue

Disabled Rogue

Suspected Rogue

Unclassified

Known Interfering

Status

If up, the AP is active. If down (or no information is shown) the AP is inactive.

Ageout

An ageout time is the time, in minutes, that the client must remain unseen by any probes before it is eliminated from the database. If this column displays a -1, the client has not yet aged out. Any other number indicates the number of minutes since the client has passed its ageout interval.

HT-Type

Type of high-throughput traffic sent by the AP.

HT-Sec-Chan

Secondary channel used for high-throughput transmissions.

Related Commands

Command

Description

wms client

This command allows you to classify a wireless client into one of several categories.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable or Config mode on Mobility Master.

/*]]>*/