You are here: Home > CLI Commands > Just_CLI_Topics > show wms counters

show wms counters

show wms counters [debug|events]

Description

This command displays WMS events and debug counters. If you omit the optional debug and events parameters, the show wms counters command displays the frequently used (general) counters in a single table.

Syntax

Parameter

Description

debug

Displays debug counters only.

events

Displays events counters only.

Usage Guidelines

This command displays counters for database entries, messages, and data structures. The counters displayed vary for each managed device; if the managed device does not have an entry for a particular counter type, it does not appear in the output of this command

Example

The following example shows output for the show wms counters command:

(host) [mynode] #show wms counters

 

Counters

--------

Name Value

---- -----

DB Reads 288268

DB Writes 350870

Probe Table DB Reads 2477

Probe Table DB Writes 952

AP Table DB Reads 143992

AP Table DB Writes 138867

STA Table DB Reads 40404

STA Table DB Writes 99687

Probe STA Table DB Reads 101352

Probe STA Table DB Writes 117566

Probe Register 2476

Probe State Update 37077

Set RAP Type 42552

Set RAP Type Conf Level 152

Valid Exempt Station Macs 10

...

Related Commands

Command

Description

wms client

This command allows you to classify a wireless client into one of several categories.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable or Config mode on Mobility Master.

/*]]>*/