You are here: Home > CLI Commands > Just_CLI_Topics > show wms rogue-ap

show wms rogue-ap

show wms rogue-ap <bssid> [list]

Description

This command displays statistics for APs classified as rogues APs.

Syntax

Parameter

Description

<bssid>

BSSIDBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly. of a rogue AP.

list

Shows Rogue AP list.

Usage Guidelines

The optional output modifiers | begin , | exclude, and | include help you display those lines that begin, include, exclude, respectively, the line expression given in the CLICommand-Line Interface. A console interface with a command line shell that allows users to execute text input as commands and convert these commands to appropriate functions. command. The | redirect-output modifier helps you redirect the command output.

Example

The output of this command shows statistics for a suspected rogue AP:

(host) [mynode] #show wms rogue-ap 00:0b:86:d4:ca:12

 

Suspect Rogue AP Info

---------------------

Key Value

--- -----

BSSID 00:0b:86:89:c6:20

SSID aruba-ap

Channel 1

Type generic-ap

RAP Type suspected-rogue

Status up

Match Type AP-Rule

Match MAC 00:0b:86:61:8a:d0

Match IP 0.0.0.0

Match AM ssahoo-155

Match Method Exact-Match

Match Time Sun Sep 19 19:11:40 2010

The output of this command includes the following information:

Column

Description

BSSID

BSSIDBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly. of the suspected rogue AP.

SSID

The rogue AP’s Extended service set identifier.

Channel

Channel used by a radio on the rogue AP.

Type

Indicates if the AP is an Aruba AP, a Cisco AP, or an AP from any other manufacturer (generic AP).

RAP Type

Type of rogue AP,

Suspect-unsecure: AP has not been confirmed as a rogue AP.

unsecure: AP has been confirmed as a rogue AP

Status

Shows if the AP is active (up) or inactive (down).

Match Type

Describes how the AP was classified as a rogue.

Eth-Wired-MAC: An Aruba AP or AMAir Monitor. AM is a mode of operation supported on wireless APs. When an AP operates in the Air Monitor mode, it enhances the wireless networks by collecting statistics, monitoring traffic, detecting intrusions, enforcing security policies, balancing wireless traffic load, self-healing coverage gaps, and more. However, clients cannot connect to APs operating in the AM mode. detected that a single MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address was in both the EthernetEthernet is a network protocol for data transmission over LAN. Wired-Mac table and a non-valid AP wired-Mac table.

AP-Wired-MAC: An interfering AP is marked as rogue when the Aruba AP finds a MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address in one of its valid AP wired-mac table and in an interfering AP wired-mac table. You can enable or disable the AP-Wired-MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. matching method using the CLICommand-Line Interface. A console interface with a command line shell that allows users to execute text input as commands and convert these commands to appropriate functions. command ids unauthorized-device-profile overlay-classification.

Config-Wired-MAC: This type of classification occurs when an Aruba AP or AMAir Monitor. AM is a mode of operation supported on wireless APs. When an AP operates in the Air Monitor mode, it enhances the wireless networks by collecting statistics, monitoring traffic, detecting intrusions, enforcing security policies, balancing wireless traffic load, self-healing coverage gaps, and more. However, clients cannot connect to APs operating in the AM mode. detects a match between a wired MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. table and a pre-defined MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address that has manually defined via the command ids unauthorized-device-profile .

External-Wired-MAC: This type of classification occurs when an Aruba AP or AMAir Monitor. AM is a mode of operation supported on wireless APs. When an AP operates in the Air Monitor mode, it enhances the wireless networks by collecting statistics, monitoring traffic, detecting intrusions, enforcing security policies, balancing wireless traffic load, self-healing coverage gaps, and more. However, clients cannot connect to APs operating in the AM mode. detects a match between a wired MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. table entry and a pre-defined MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address manually defined in the ids rap-wml-server-profile table.

Base-BSSID-Override: If an Aruba AP is detected as rogue, then all virtual APs on the particular rogue are marked as rogue using Base-BSSIDBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly.-Override match type.

Manual: An AP is manually defined as a rogue by via the command wms ap <bssid>Basic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly. mode rogue.

EMS: An AP is manually defined as a rogue by via the Element Management System.

Match MAC

MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address of a wired device that helped identify the AP as a rogue. If the AP has not been identified as a rogue, this column will display the MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address 00:00:00:00:00:00.

Match IP

IP address of a wired device that helped identify the AP as a rogue.

Match AM

Aruba Air Monitor that reported seeing the rogue AP.

Match Method

This variable indicates the type of match.

Match Time

Time the AP was identified as a rogue AP.

Related Commands

Command

Description

wms ap

This command allows you to classify an AP into one of several categories.

wms client

This command allows you to classify a wireless client into one of several categories.

Command History

Release

Modification

ArubaOS 8.2.0.0

The list parameter was added.

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable or Config mode on Mobility Master.

/*]]>*/