You are here: Home > CLI Commands > Just_CLI_Topics > show wms routers

show wms routers

show wms routers [<mac>]

Description

This command displays learned router MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. information for WMS APs.

Syntax

Parameter

Description

<mac>

MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address of a probe that can see the router.

Usage Guidelines

This command displays the MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. addresses of devices that have been determined to be routers by the listed APs. This output of this command will be blank if there is not any broadcast or multicast activity in an AP's subnetSubnet is the logical division of an IP network..

Example

In the example below, a single WMS AP has learned MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. information for four different routers.

(host) [mynode] #show wms routers

 

Router Mac 00:08:00:00:11:12 is Seen by APs

-------------------------------------------

AP-Name

-------

AP32

Router Mac 00:08:00:00:11:29 is Seen by APs

-------------------------------------------

AP-Name

-------

AP32

Router Mac 00:08:00:00:11:57 is Seen by APs

-------------------------------------------

AP-Name

-------

AP32

Router Mac 00:08:00:00:11:6e is Seen by APs

-------------------------------------------

AP-Name

-------

AP32

Related Commands

Command

Description

wms ap

This command allows you to classify an AP into one of several categories.

wms client

This command allows you to classify a wireless client into one of several categories.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable or Config mode on Mobility Master.

/*]]>*/