You are here: Home > CLI Commands > Just_CLI_Topics > show wnm-dot11v bss-tm-response

show wnm-dot11v bss-tm-response

show wnm-dot11v bss-tm-response station-mac <mac>

Description

This command displays the BSSBasic Service Set. A BSS is a set of interconnected stations that can communicate with each other. BSS can be an independent BSS or infrastructure BSS. An independent BSS is an ad hoc network that does not include APs, whereas the infrastructure BSS consists of an AP and all its associated clients.  transition management response for a given client.

Syntax

Column

Description

<mac>

MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network.  address of the client.

Example

The following example shows the BSSBasic Service Set. A BSS is a set of interconnected stations that can communicate with each other. BSS can be an independent BSS or infrastructure BSS. An independent BSS is an ad hoc network that does not include APs, whereas the infrastructure BSS consists of an AP and all its associated clients.  transition management response for a client:

(host) [mynode] #show wnm-dot11v bss-tm-response station-mac 58:94:6b:31:d0:f0

VLAN Assignment

---------------

VLAN #CLIENTS

---- --------

1 0

192 1

Command History

Version

Modification

ArubaOS 8.0.0.0

Command Introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable or Config mode on Mobility Master.

/*]]>*/