You are here: Home > CLI Commands > Just_CLI_Topics > stm

stm

stm

add-blacklist-client <macaddr>

disable-timing-stats

enable-timing-stats

kick-off-sta <macaddr> <bssid>

purge-blacklist-clients

remove-blacklist-client <macaddr>

start-trace <macaddr>

stop-trace <macaddr>

mon-update-queue <threshold>

Description

This command is used to manually disconnect a client from an AP or control the blacklisting of clients.

Syntax

Parameter

Description

add-blacklist-client

MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address of the client to be added to the denial of service list.

disable-timing-stats

Disables performance monitoring in STMStation Management. STM is a process that handles AP management and user association..

enable-timing-stats

Enables performance monitoring in STMStation Management. STM is a process that handles AP management and user association..

kick-off-sta

When you use the kick-off-sta feature specify a client’s MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address and BSSIDBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly., the AP sends deauthorization frames to the station to disconnect it.

<macaddr>

MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address of client to be disconnected.

<bssid>

The associated BSSIDBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly. of the client to be disconnected.

purge-blacklist-client

Clear the entire client blacklist.

remove-blacklist-client <macaddr>

Specify the MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address of a client to remove it from the denial of service list.

start-trace <macaddr>

Starts tracing probe requests and probe responses from the specified client.

stop-trace <macaddr>

Stops tracing probe requests and probe response from the specified client.

mon-update-queue <threshold>

Configures the maximum queue size for the STMStation Management. STM is a process that handles AP management and user association. monitoring updates.

NOTE: This parameter is available only in Config mode on Mobility Master.

Usage Guidelines

When you blacklist a client, the client is not allowed to associate with any AP in the network. If the client is connected to the network when you blacklist it, a deauthentication message is sent to force the client to disconnect. The blacklisted client is blacklisted for the duration specified in the virtual AP profile. The client blacklist supports up to 4,000 individual client entries.

The managed device retains the client blacklist in the user database, so the information is not lost if the managed device reboots. When you import or export the managed device’s user database, the client blacklist will be exported or imported as well.

Example

The following command blacklists a client:

(host) #stm add-blacklist-client 00:01:6C:CC:8A:6D

Related Commands

Command

Description

show stm

This command is used to display the deauthentication reasons and the monitoring update queue information from the station management module.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Enable mode on Mobility Master.

/*]]>*/