You are here: Home > CLI Commands > Just_CLI_Topics > telnet

telnet

telnet <host> [port <port_num>]

cli

soe

Description

This command enables telnet to Mobility Master or to an AP through Mobility Master.

Syntax

Parameter

Description

Default

host

IP address of the host Mobility Master

port

Port number in the host

cli

Enable telnet using the CLICommand-Line Interface. A console interface with a command line shell that allows users to execute text input as commands and convert these commands to appropriate functions..

Disabled

soe

Enable telnet using Serial over EthernetEthernet is a network protocol for data transmission over LAN. (SoE).

Disabled

Usage Guidelines

Use the host and port to specify the host IP address and the port to enable telnet. This command is available only in Enable mode.

Use the cli option to enable telnet to Mobility Master.

Use the soe option to enable telnet using the SoE protocol. This allows you to remotely manage an AP directly connected to Mobility Master.

Example

The following example enables telnet to Mobility Master using the CLICommand-Line Interface. A console interface with a command line shell that allows users to execute text input as commands and convert these commands to appropriate functions.:

(host) [mynode] (config) #telnet cli

Related Commands

Command

Description

show telnet

Displays the telnet access status.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable and Config mode on Mobility Master.

/*]]>*/