You are here: Home > CLI Commands > Just_CLI_Topics > tunnel-loop-prevention

tunnel-loop-prevention

tunnel-loop-prevention

Description

This command prevents prevent forwarding loops between tunneled nodes on the managed device.

Syntax

No parameters.

Usage Guidelines

This command prevents forwarding loops between tunnels from the tunneled nodes on the managed device.

To allow a tunneled node-connected machine to communicate with another managed device that is a connected client on the same subnetSubnet is the logical division of an IP network., you must enable broadcast-filter-arp.

Example

The following command prevents tunneled node forwarding:

(host) [mynode] (config) #tunnel-loop-prevention

Related Commands

Related Commands

Command

Description

show tunneled-node

Displays the wired tunneled node configuration details, the state of the tunneled node, and lists all the tunneled nodes in the database.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Requires the PEFNGPolicy Enforcement Firewall. PEF also known as PEFNG provides context-based controls to enforce application-layer security and prioritization. The customers using Aruba mobility controllers can avail PEF features and services by obtaining a PEF license. PEF for VPN users—Customers with PEF for VPN license can apply firewall policies to the user traffic routed to a controller through a VPN tunnel. license.

Config mode on Mobility Master.

/*]]>*/