You are here: Home > CLI Commands > Just_CLI_Topics > tunneled-node-address

tunneled-node-address

tunneled-node-address <ipaddr>

Description

This command configures the IP address of a tunneled node server.

Syntax

Parameter

Description

tunneled-node-address

IP address of the managed device. This is the loopback or IP address of the managed device acting as a tunneled node managed device.

Usage Guidelines

A Aruba managed device can operate as a Wi-FiWi-Fi is a technology that allows electronic devices to connect to a WLAN network, mainly using the 2.4 GHz and 5 GHz radio bands. Wi-Fi can apply to products that use any 802.11 standard. managed device, terminating GREGeneric Routing Encapsulation. GRE is an IP encapsulation protocol that is used to transport packets over a network. tunnels from tunneled node switches. As a Wi-FiWi-Fi is a technology that allows electronic devices to connect to a WLAN network, mainly using the 2.4 GHz and 5 GHz radio bands. Wi-Fi can apply to products that use any 802.11 standard. managed device, the managed device does not perform full Wi-FiWi-Fi is a technology that allows electronic devices to connect to a WLAN network, mainly using the 2.4 GHz and 5 GHz radio bands. Wi-Fi can apply to products that use any 802.11 standard. switching functions. Instead, it accepts traffic from ports designated as tunneled node ports, packages this traffic inside a GREGeneric Routing Encapsulation. GRE is an IP encapsulation protocol that is used to transport packets over a network. tunnel, and forwards the traffic back to a central managed device for processing.

Example

The following command configures the address of a managed device for tunneled nodes:

(host)[mynode] (config) #tunneled-node-address 192.168.1.245

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Config mode on Mobility Master.

/*]]>*/