You are here: Home > CLI Commands > Just_CLI_Topics > ucc

ucc

ucc

facetime {enable|no|priority video <0-63>}

h323 {enable|no|priority voice <0-63>}

ich {channel-utilization-threshold <50-95>|enable|no}

jabber

enable

no

priority {appShort form for application. It generally refers to the application that is downloaded and used on mobile devices.-sharing <0-63>|video <0-63>|voice <0-63>}

server-ip <server-ip>

noe {enable|no|priority voice <0-63>}

rtpa-config {enable|no|upstream}

sccp {enable|no|priority voice <0-63>}

session-idle-timeout {no|value <35-250>}

sip

enable

midcall-req-timeout

no

priority {video <0-63>|voice <0-63>}

rtcp-inactivity

skype4b

enable

no

priority {appShort form for application. It generally refers to the application that is downloaded and used on mobile devices.-sharing <0-63>|video <0-63>|voice <0-63>}

sdn {http|https}

tables

vocera {enable|no|priority voice <0-63>}

wificalling

dns-pattern <dns-pattern> service-provider <service-provider>

enable

no

priority voice <0-62>

Description

This command configures the various UCCUnified Communications and Collaboration. UCC is a term used to describe the integration of various communications methods with collaboration tools such as virtual whiteboards, real-time audio and video conferencing, and enhanced call control capabilities. Application Layer GatewaysGateway is a network node that allows traffic to flow in and out of the network. (ALGs).

Syntax

Parameter

Description

Range

Default

facetime

Configures the Apple® FaceTime ALGApplication Layer Gateway. ALG is a security component that manages application layer protocols such as SIP, FTP and so on. . The ALGApplication Layer Gateway. ALG is a security component that manages application layer protocols such as SIP, FTP and so on. is enabled by default. The DSCPDifferentiated Services Code Point. DSCP is a 6-bit packet header value used for traffic classification and priority assignment. value for the video session is 34 by default. This parameter has the following sub-parameters:

enable– Enable the Apple Facetime ALGApplication Layer Gateway. ALG is a security component that manages application layer protocols such as SIP, FTP and so on. on the Mobility Master.

no– Remove or negate a parameter.

priority– The DSCPDifferentiated Services Code Point. DSCP is a 6-bit packet header value used for traffic classification and priority assignment. value for the video session.

priority video: 0-63

priority video: 34

h323

Configures the H.323 ALGApplication Layer Gateway. ALG is a security component that manages application layer protocols such as SIP, FTP and so on. . The ALGApplication Layer Gateway. ALG is a security component that manages application layer protocols such as SIP, FTP and so on. is enabled by default. The DSCPDifferentiated Services Code Point. DSCP is a 6-bit packet header value used for traffic classification and priority assignment. value for the voice session is 46 by default. This parameter has the following sub-parameters:

enable– Enable the H.323 ALGApplication Layer Gateway. ALG is a security component that manages application layer protocols such as SIP, FTP and so on. on the Mobility Master.

no– Remove or negate a parameter.

priority– The DSCPDifferentiated Services Code Point. DSCP is a 6-bit packet header value used for traffic classification and priority assignment. value for the voice session.

priority voice: 0-63

priority voice: 46

ich

Configures the intelligent call handling. The setting is enabled by default. The Channel Utilization Threshold is 90 by default. This parameter has the following sub-parameters:

channel-utilization-threshold–The maximum limit for the channel utilization.

enable–Enable intelligent call handling on the Mobility Master.

no–Remove or negate a parameter.

channel-utilization-threshold: 50-95

channel-utilization-threshold: 90

jabber

Configures the Cisco® Jabber ALGApplication Layer Gateway. ALG is a security component that manages application layer protocols such as SIP, FTP and so on. . The ALGApplication Layer Gateway. ALG is a security component that manages application layer protocols such as SIP, FTP and so on. is enabled by default. Enter the Cisco Unified Communication Manager IM & Presence server IP. The DSCPDifferentiated Services Code Point. DSCP is a 6-bit packet header value used for traffic classification and priority assignment. values for the voice, video, and appShort form for application. It generally refers to the application that is downloaded and used on mobile devices.-sharing sessions are 46, 34, and 34, respectively, by default. This parameter has the following sub-parameters:

enable–Enable Jabber ALGApplication Layer Gateway. ALG is a security component that manages application layer protocols such as SIP, FTP and so on. on the Mobility Master.

no–Remove or negate a parameter.

priority–The DSCPDifferentiated Services Code Point. DSCP is a 6-bit packet header value used for traffic classification and priority assignment. value for voice, video, and appShort form for application. It generally refers to the application that is downloaded and used on mobile devices.-sharing sessions.

server-ip–Jabber server IP.

appShort form for application. It generally refers to the application that is downloaded and used on mobile devices.-sharing, video, and voice: 0-63

appShort form for application. It generally refers to the application that is downloaded and used on mobile devices.-sharing: 34

video: 34

voice: 46

noe

Configures the Alcatel-Lucent® New Office Environment (NOENew Office Environment. NOE is a proprietary VoIP protocol designed by Alcatel-Lucent Enterprise.) ALGApplication Layer Gateway. ALG is a security component that manages application layer protocols such as SIP, FTP and so on. . The ALGApplication Layer Gateway. ALG is a security component that manages application layer protocols such as SIP, FTP and so on. is enabled by default. The DSCPDifferentiated Services Code Point. DSCP is a 6-bit packet header value used for traffic classification and priority assignment. value for the voice session is 46 by default. This parameter has the following sub-parameters:

enable– Enable the NOENew Office Environment. NOE is a proprietary VoIP protocol designed by Alcatel-Lucent Enterprise. ALGApplication Layer Gateway. ALG is a security component that manages application layer protocols such as SIP, FTP and so on. on the Mobility Master.

no– Remove or negate a parameter.

priority– The DSCPDifferentiated Services Code Point. DSCP is a 6-bit packet header value used for traffic classification and priority assignment. value for the voice session.

priority voice: 0-63

priority voice: 46

rtpa-config

Configures the real-time analysis of VoIPVoice over IP. VoIP allows transmission of voice and multimedia content over an IP network. calls including upstream real-time analysis. The

setting is enabled by default. This parameter has the following sub-parameters:

enable– Enable Real-Time Analysis of VoIPVoice over IP. VoIP allows transmission of voice and multimedia content over an IP network. calls.

no– Remove or negate a parameter.

upstream–Enable upstream Real-Time Analysis of VoIPVoice over IP. VoIP allows transmission of voice and multimedia content over an IP network. calls.

sccp

Configures the Cisco Skinny Client Control Protocol (SCCP) ALGApplication Layer Gateway. ALG is a security component that manages application layer protocols such as SIP, FTP and so on. . The ALGApplication Layer Gateway. ALG is a security component that manages application layer protocols such as SIP, FTP and so on. is enabled by default. The DSCPDifferentiated Services Code Point. DSCP is a 6-bit packet header value used for traffic classification and priority assignment. value for the voice session is 46 by default. This parameter has the following sub-parameters:

enable– Enable the SCCP ALGApplication Layer Gateway. ALG is a security component that manages application layer protocols such as SIP, FTP and so on. on the Mobility Master.

no– Remove or negate a parameter.

priority– The DSCPDifferentiated Services Code Point. DSCP is a 6-bit packet header value used for traffic classification and priority assignment. value for the voice session.

priority voice: 0-63

priority voice: 46

session-idle-timeout

Configures the UCCUnified Communications and Collaboration. UCC is a term used to describe the integration of various communications methods with collaboration tools such as virtual whiteboards, real-time audio and video conferencing, and enhanced call control capabilities. session idle timeout. On configuring this parameter, if the voice session is idle for the configured period, UCM aborts the session on the managed device due to inactivity. The default value is 35. This parameter has the following sub-parameters:

no– Remove or negate a parameter.

value– Configure UCCUnified Communications and Collaboration. UCC is a term used to describe the integration of various communications methods with collaboration tools such as virtual whiteboards, real-time audio and video conferencing, and enhanced call control capabilities. session idle timeout in seconds.

value: 35-250

value: 35

sip

Configures the Session Initiation Protocol (SIPSession Initiation Protocol. SIP is used for signaling and controlling multimedia communication session such as voice and video calls. ) ALGApplication Layer Gateway. ALG is a security component that manages application layer protocols such as SIP, FTP and so on. . The ALGApplication Layer Gateway. ALG is a security component that manages application layer protocols such as SIP, FTP and so on. is enabled by default. You can enable the SIP Midcall request timeout and RTCP inactivity settings. The DSCPDifferentiated Services Code Point. DSCP is a 6-bit packet header value used for traffic classification and priority assignment. values for the voice and video sessions are 46 and 34, respectively, by default. This parameter has the following sub-parameters:

enable–Enable SIPSession Initiation Protocol. SIP is used for signaling and controlling multimedia communication session such as voice and video calls. ALGApplication Layer Gateway. ALG is a security component that manages application layer protocols such as SIP, FTP and so on. on the Mobility Master.

midcall-req-timeout–Enable SIPSession Initiation Protocol. SIP is used for signaling and controlling multimedia communication session such as voice and video calls. Midcall request timeout.

no–Remove or negate a parameter.

priority–The DSCPDifferentiated Services Code Point. DSCP is a 6-bit packet header value used for traffic classification and priority assignment. value for voice and video sessions.

rtcp-inactivity–Enable Real-Time Control Protocol inactivity.

video and voice: 0-63

video: 34

voice: 46

skype4b

Configures the Microsoft® Lync/Skype for Business ALGApplication Layer Gateway. ALG is a security component that manages application layer protocols such as SIP, FTP and so on. . The ALGApplication Layer Gateway. ALG is a security component that manages application layer protocols such as SIP, FTP and so on. is enabled by default. You

can set the Skype for Business SDNSoftware-Defined Networking. SDN is an umbrella term encompassing several kinds of network technology aimed at making the network as agile and flexible as the virtualized server and storage infrastructure of the modern data center. listen protocol over HTTPHypertext Transfer Protocol. The HTTP is an application protocol to transfer data over the web. The HTTP protocol defines how messages are formatted and transmitted, and the actions that the w servers and browsers should take in response to various commands. or HTTPSHypertext Transfer Protocol Secure. HTTPS is a variant of the HTTP that adds a layer of security on the data in transit through a secure socket layer or transport layer security protocol connection.. Based on the SDNSoftware-Defined Networking. SDN is an umbrella term encompassing several kinds of network technology aimed at making the network as agile and flexible as the virtualized server and storage infrastructure of the modern data center. listen protocol configuration, Mobility Master accepts either HTTPHypertext Transfer Protocol. The HTTP is an application protocol to transfer data over the web. The HTTP protocol defines how messages are formatted and transmitted, and the actions that the w servers and browsers should take in response to various commands. or HTTPSHypertext Transfer Protocol Secure. HTTPS is a variant of the HTTP that adds a layer of security on the data in transit through a secure socket layer or transport layer security protocol connection. messages from the Skype for Business SDNSoftware-Defined Networking. SDN is an umbrella term encompassing several kinds of network technology aimed at making the network as agile and flexible as the virtualized server and storage infrastructure of the modern data center. manager. The DSCPDifferentiated Services Code Point. DSCP is a 6-bit packet header value used for traffic classification and priority assignment. values for the voice, video, and appShort form for application. It generally refers to the application that is downloaded and used on mobile devices.-sharing sessions are 46, 34, and 34, respectively, by default. This parameter has the following sub-parameters:

enable–Enable Skype for Business ALGApplication Layer Gateway. ALG is a security component that manages application layer protocols such as SIP, FTP and so on. on the Mobility Master.

no–Remove or negate a parameter.

priority–The DSCPDifferentiated Services Code Point. DSCP is a 6-bit packet header value used for traffic classification and priority assignment. value for voice, video, and appShort form for application. It generally refers to the application that is downloaded and used on mobile devices.-sharing sessions.

sdn–Skype for Business SDNSoftware-Defined Networking. SDN is an umbrella term encompassing several kinds of network technology aimed at making the network as agile and flexible as the virtualized server and storage infrastructure of the modern data center. listen protocol. The default Skype for Business SDNSoftware-Defined Networking. SDN is an umbrella term encompassing several kinds of network technology aimed at making the network as agile and flexible as the virtualized server and storage infrastructure of the modern data center. APIApplication Programming Interface. Refers to a set of functions, procedures, protocols, and tools that enable users to build application software. listen port is 32000.

appShort form for application. It generally refers to the application that is downloaded and used on mobile devices.-sharing, video, and voice: 0-63

appShort form for application. It generally refers to the application that is downloaded and used on mobile devices.-sharing: 34

video: 34

voice: 46

tables

Displays the UCCUnified Communications and Collaboration. UCC is a term used to describe the integration of various communications methods with collaboration tools such as virtual whiteboards, real-time audio and video conferencing, and enhanced call control capabilities. client MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. and IP address table.

NOTE: This parameter is executable from the enable mode.

vocera

Configure the Vocera ALGApplication Layer Gateway. ALG is a security component that manages application layer protocols such as SIP, FTP and so on. . The ALGApplication Layer Gateway. ALG is a security component that manages application layer protocols such as SIP, FTP and so on. is enabled by default. The DSCPDifferentiated Services Code Point. DSCP is a 6-bit packet header value used for traffic classification and priority assignment. value for the voice

session is 46 by default. This parameter has the following sub-parameters:

enable– Enable the Vocera ALGApplication Layer Gateway. ALG is a security component that manages application layer protocols such as SIP, FTP and so on. on the Mobility Master.

no– Remove or negate a parameter.

priority– The DSCPDifferentiated Services Code Point. DSCP is a 6-bit packet header value used for traffic classification and priority assignment. value for the voice session.

priority voice: 0-63

priority voice: 46

wificalling

Configures the Wi-FiWi-Fi is a technology that allows electronic devices to connect to a WLAN network, mainly using the 2.4 GHz and 5 GHz radio bands. Wi-Fi can apply to products that use any 802.11 standard. Calling. Wi-FiWi-Fi is a technology that allows electronic devices to connect to a WLAN network, mainly using the 2.4 GHz and 5 GHz radio bands. Wi-Fi can apply to products that use any 802.11 standard. Calling is enabled by default. The DSCPDifferentiated Services Code Point. DSCP is a 6-bit packet header value used for traffic classification and priority assignment. value for the

voice session is 46 by default.

dns-pattern– Configure the DNSDomain Name System. A DNS server functions as a phone book for the intranet and Internet users. It converts human-readable computer host names into IP addresses and IP addresses into host names. It stores several records for a domain name such as an address 'A' record, name server (NS), and mail exchanger (MX) records. The Address 'A' record is the most important record that is stored in a DNS server, because it provides the required IP address for a network peripheral or element. pattern for the carrier. A maximum of 10 DNSDomain Name System. A DNS server functions as a phone book for the intranet and Internet users. It converts human-readable computer host names into IP addresses and IP addresses into host names. It stores several records for a domain name such as an address 'A' record, name server (NS), and mail exchanger (MX) records. The Address 'A' record is the most important record that is stored in a DNS server, because it provides the required IP address for a network peripheral or element. patterns can be configured. DNSDomain Name System. A DNS server functions as a phone book for the intranet and Internet users. It converts human-readable computer host names into IP addresses and IP addresses into host names. It stores several records for a domain name such as an address 'A' record, name server (NS), and mail exchanger (MX) records. The Address 'A' record is the most important record that is stored in a DNS server, because it provides the required IP address for a network peripheral or element. patterns for known carriers are configured by default. Default built-in patterns are:

- 3 HK - wlanWireless Local Area Network. WLAN is a 802.11 standards-based LAN that the users access through a wireless connection..three.com.hk

- ATT - epdg.epc.att.net

- Rogers - epdg.epc.mnc720.mcc302.pub.3gppnetwork.org

- SmarTone - epdg.epc.mnc006.mcc454.pub.3gppnetwork.org

- Sprint - primgw.vowifi2.spcsdns.net

- T-Mobile - ss.epdg.epc.mnc260.mcc310.pub.3gppnetwork.org

- Verizon - wo.vzwwo.com

If the ePDG FQDNFully Qualified Domain Name. FQDN is a complete domain name that identifies a computer or host on the Internet. of the carrier does not match with the default patterns, use this option to configure the DNSDomain Name System. A DNS server functions as a phone book for the intranet and Internet users. It converts human-readable computer host names into IP addresses and IP addresses into host names. It stores several records for a domain name such as an address 'A' record, name server (NS), and mail exchanger (MX) records. The Address 'A' record is the most important record that is stored in a DNS server, because it provides the required IP address for a network peripheral or element. pattern for the carrier.

NOTE: The DNSDomain Name System. A DNS server functions as a phone book for the intranet and Internet users. It converts human-readable computer host names into IP addresses and IP addresses into host names. It stores several records for a domain name such as an address 'A' record, name server (NS), and mail exchanger (MX) records. The Address 'A' record is the most important record that is stored in a DNS server, because it provides the required IP address for a network peripheral or element. IP address that Mobility Master learns for Wi-FiWi-Fi is a technology that allows electronic devices to connect to a WLAN network, mainly using the 2.4 GHz and 5 GHz radio bands. Wi-Fi can apply to products that use any 802.11 standard. Calling age out automatically, if there was no DNSDomain Name System. A DNS server functions as a phone book for the intranet and Internet users. It converts human-readable computer host names into IP addresses and IP addresses into host names. It stores several records for a domain name such as an address 'A' record, name server (NS), and mail exchanger (MX) records. The Address 'A' record is the most important record that is stored in a DNS server, because it provides the required IP address for a network peripheral or element. query or response matching that IP for more than seven days.

service-provider– Add the service provider name for enhanced visibility.

enable– Enable the Wi-FiWi-Fi is a technology that allows electronic devices to connect to a WLAN network, mainly using the 2.4 GHz and 5 GHz radio bands. Wi-Fi can apply to products that use any 802.11 standard. calling ALGApplication Layer Gateway. ALG is a security component that manages application layer protocols such as SIP, FTP and so on. on the Mobility Master.

no– Remove or negate a parameter.

priority– The DSCPDifferentiated Services Code Point. DSCP is a 6-bit packet header value used for traffic classification and priority assignment. value for the voice session.

priority voice: 0-62

priority voice: 46

Usage Guidelines

The UCCUnified Communications and Collaboration. UCC is a term used to describe the integration of various communications methods with collaboration tools such as virtual whiteboards, real-time audio and video conferencing, and enhanced call control capabilities. ALGs must be configured from the /mm node hierarchy of Mobility Master. All the ALGs are enabled by default.

Examples

The following commands enables Wi-FiWi-Fi is a technology that allows electronic devices to connect to a WLAN network, mainly using the 2.4 GHz and 5 GHz radio bands. Wi-Fi can apply to products that use any 802.11 standard. calling on Mobility Master:

(host) [mm] (config) #ucc wificalling

(host) ^[mm] (WiFiCalling Configuration) #enable

The following command displays the UCCUnified Communications and Collaboration. UCC is a term used to describe the integration of various communications methods with collaboration tools such as virtual whiteboards, real-time audio and video conferencing, and enhanced call control capabilities. client MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. and IP address table. The ucc tables command should be executed from the enable mode:

(host) [mynode] #ucc tables

 

---------------------------------------------

UCC Client MAC table

--------------------

Client(MAC) Client(IP) Type ALG

----------- ---------- ---- ---

68:17:29:9f:b6:77 10.15.88.234 Client Jabber/xmpp/SIP

---------------------------------------------

UCC Client IP table

-------------------

Client(MAC) Client(IP) Type ALG

----------- ---------- ---- ---

00:0b:86:8f:d6:b7 10.15.16.50 Server SIP

00:0b:86:8f:d6:b7 10.15.16.30 Server Jabber

68:17:29:9f:b6:77 10.15.88.234 Client Jabber/xmpp/SIP

---------------------------------------------

Related Commands

Command

Description

show ucc call-info cdrs

This command displays the Call Detailed Records (CDRCall Detail Record. A CDR contains the details of a telephone or VoIP call, such as the origin and destination addresses of the call, the start time and end time of the call, any toll charges that were added through the network or charges for operator services, and so on.) statistics for UCCUnified Communications and Collaboration. UCC is a term used to describe the integration of various communications methods with collaboration tools such as virtual whiteboards, real-time audio and video conferencing, and enhanced call control capabilities..

show ucc client-info

This command displays the UCCUnified Communications and Collaboration. UCC is a term used to describe the integration of various communications methods with collaboration tools such as virtual whiteboards, real-time audio and video conferencing, and enhanced call control capabilities. client status and CDRCall Detail Record. A CDR contains the details of a telephone or VoIP call, such as the origin and destination addresses of the call, the start time and end time of the call, any toll charges that were added through the network or charges for operator services, and so on. statistics.

show ucc dns-ip-learning

This command displays the carrier’s evolved Packet Data GatewayGateway is a network node that allows traffic to flow in and out of the network. (ePDG) IP address learned by the managed device. This command is specific for Wi-FiWi-Fi is a technology that allows electronic devices to connect to a WLAN network, mainly using the 2.4 GHz and 5 GHz radio bands. Wi-Fi can apply to products that use any 802.11 standard. calling clients.

show ucc facetime

This command displays the Apple Facetime ALGApplication Layer Gateway. ALG is a security component that manages application layer protocols such as SIP, FTP and so on. configuration.

show ucc h323

This command displays the H.323 ALGApplication Layer Gateway. ALG is a security component that manages application layer protocols such as SIP, FTP and so on. configuration.

show ucc ich

This command displays the Intelligent Call Handling configuration.

show ucc internal-state

This command displays the number of CDRs, flows, and voice clients created. This is a debug command.

show ucc jabber

This command displays the Cisco Jabber ALGApplication Layer Gateway. ALG is a security component that manages application layer protocols such as SIP, FTP and so on. configuration.

show ucc noe

This command displays the Alcatel-Lucent New Office Environment (NOENew Office Environment. NOE is a proprietary VoIP protocol designed by Alcatel-Lucent Enterprise.) ALGApplication Layer Gateway. ALG is a security component that manages application layer protocols such as SIP, FTP and so on. configuration.

show ucc rtpa-config

This command displays the real-time analysis configuration.

show ucc rtpa-report

This command displays the real-time analysis report.

show ucc sccp

This command displays the Cisco Skinny Client Control Protocol (SCCP) ALGApplication Layer Gateway. ALG is a security component that manages application layer protocols such as SIP, FTP and so on. configuration.

show ucc session-idle-timeout

This command displays the UCCUnified Communications and Collaboration. UCC is a term used to describe the integration of various communications methods with collaboration tools such as virtual whiteboards, real-time audio and video conferencing, and enhanced call control capabilities. session idle timeout configuration.

show ucc sip

This command displays the SIPSession Initiation Protocol. SIP is used for signaling and controlling multimedia communication session such as voice and video calls. ALGApplication Layer Gateway. ALG is a security component that manages application layer protocols such as SIP, FTP and so on. configuration.

show ucc skype4b

This command displays the Skype4B ALGApplication Layer Gateway. ALG is a security component that manages application layer protocols such as SIP, FTP and so on. configuration.

show ucc statistics

This command displays the UCCUnified Communications and Collaboration. UCC is a term used to describe the integration of various communications methods with collaboration tools such as virtual whiteboards, real-time audio and video conferencing, and enhanced call control capabilities. call statistics.

show ucc trace-buffer

This command displays the UCCUnified Communications and Collaboration. UCC is a term used to describe the integration of various communications methods with collaboration tools such as virtual whiteboards, real-time audio and video conferencing, and enhanced call control capabilities. call message trace buffer for Cisco Jabber, Cisco SCCP, SIPSession Initiation Protocol. SIP is used for signaling and controlling multimedia communication session such as voice and video calls. , and Microsoft Skype for Business ALGs.

show ucc vocera

This command displays the Vocera ALGApplication Layer Gateway. ALG is a security component that manages application layer protocols such as SIP, FTP and so on. configuration.

show ucc wificalling

This command displays the Wi-FiWi-Fi is a technology that allows electronic devices to connect to a WLAN network, mainly using the 2.4 GHz and 5 GHz radio bands. Wi-Fi can apply to products that use any 802.11 standard. calling configuration.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platform

License

Command Mode

All platforms

PEFNGPolicy Enforcement Firewall. PEF also known as PEFNG provides context-based controls to enforce application-layer security and prioritization. The customers using Aruba mobility controllers can avail PEF features and services by obtaining a PEF license. PEF for VPN users—Customers with PEF for VPN license can apply firewall policies to the user traffic routed to a controller through a VPN tunnel. license.

Config mode on Mobility Master.

/*]]>*/