You are here: Home > CLI Commands > Just_CLI_Topics > whitelist-db cpsec modify

whitelist-db cpsec modify

whitelist-db cpsec modify mac-address <name>

ap-group <ap_group>

ap-name <ap_name>

cert-type {factory-cert|switch-cert}

description <description>

mode {disable|enable}

revoke-text <revoke-text>

state {approved-ready-for-cert|certified-factory-cert}

Description

Modify an existing entry in the campus APCampus APs are used in private networks where APs connect over private links (LAN, WLAN, WAN or MPLS) and terminate directly on controllers. Campus APs are deployed as part of the indoor campus solution in enterprise office buildings, warehouses, hospitals, universities, and so on. whitelist.

Syntax

Parameter

Description

mac-address <name>

MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address of an AP in the campus APCampus APs are used in private networks where APs connect over private links (LAN, WLAN, WAN or MPLS) and terminate directly on controllers. Campus APs are deployed as part of the indoor campus solution in enterprise office buildings, warehouses, hospitals, universities, and so on. whitelist database.

ap-group <ap_group>

(Optional) Name of the AP group to which an AP is assigned.

NOTE: If AP group is not entered, a campus APCampus APs are used in private networks where APs connect over private links (LAN, WLAN, WAN or MPLS) and terminate directly on controllers. Campus APs are deployed as part of the indoor campus solution in enterprise office buildings, warehouses, hospitals, universities, and so on. boots with "default" as the AP group.

ap-name <ap_name>

(Optional) Name of an AP.

NOTE: If AP name is not entered, a campus APCampus APs are used in private networks where APs connect over private links (LAN, WLAN, WAN or MPLS) and terminate directly on controllers. Campus APs are deployed as part of the indoor campus solution in enterprise office buildings, warehouses, hospitals, universities, and so on. boots with its MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address as the AP name.

cert-type

{factory-cert|switch-cert}

(Optional) Type of certificate used by an AP.

factory-cert: AP uses a factory-installed certificate.

switch-cert: AP uses a controller-signed certificate.

description <description>

(Optional) Brief description of an AP. If the description includes spaces, enclose the description in quotation marks.

mode {disable|enable}

(Optional) Mode of an AP.

disable: Disables an AP in the campus APCampus APs are used in private networks where APs connect over private links (LAN, WLAN, WAN or MPLS) and terminate directly on controllers. Campus APs are deployed as part of the indoor campus solution in enterprise office buildings, warehouses, hospitals, universities, and so on. whitelist. A disabled AP cannot contact a managed device over a secure connection.

enable: Enables a disabled AP in the campus APCampus APs are used in private networks where APs connect over private links (LAN, WLAN, WAN or MPLS) and terminate directly on controllers. Campus APs are deployed as part of the indoor campus solution in enterprise office buildings, warehouses, hospitals, universities, and so on. whitelist.

revoke-text <revoke-text>

(Optional) Brief description why an AP was revoked.

state

{approved-ready-for-cert|

certified-factory-cert}

(Optional) State of an AP.

approved-ready-for-cert: AP is approved and is ready to receive a certificate.

certified-factory-cert: AP is certified and has a factory-installed certificate.

Example

The following command changes the AP group, AP name, certificate type, description, mode, revoke text, and state of an AP with MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address 00:1E:37:CB:D4:52:

(host)[node] #whitelist-db cpsec modify mac-address 00:1E:37:CB:D4:52

ap-group default

ap-name ap-225

cert-type factory-cert

description "AP-225 in lobby"

mode disable

revoke-text "Maintenance"

state approved-ready-for-cert

Related Commands

Command

Description

show whitelist-db cpsec

Show the campus APCampus APs are used in private networks where APs connect over private links (LAN, WLAN, WAN or MPLS) and terminate directly on controllers. Campus APs are deployed as part of the indoor campus solution in enterprise office buildings, warehouses, hospitals, universities, and so on. whitelist for the control plane feature.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platform

License

Command Mode

All platforms

Base operating system.

Config mode on Mobility Master.

/*]]>*/