You are here: Home > CLI Commands > Just_CLI_Topics > wlan dot11r-profile

wlan dot11r-profile

wlan dotllr-profile <profile-name>

clone

dot11r

key-duration <60-86400>

key-assignment

mob-domain-id <1-65535>

no

Description

This command configures an 802.11r802.11r is an IEEE standard for enabling seamless BSS transitions in a WLAN. 802.11r standard is also referred to as Fast BSS transition. radio profile.

Syntax

Parameter

Description

Range

Default

<profile-name>

Name of this instance of the profile. The name must be 1-63 characters.

Default

clone

Name of an existing dot11r-profile from which the

parameter values are copied.

mob-domain-id

An ID that uniquely identifies the mobility domain.

1-65535

1

dot11r

Enables the Fast BSSBasic Service Set. A BSS is a set of interconnected stations that can communicate with each other. BSS can be an independent BSS or infrastructure BSS. An independent BSS is an ad hoc network that does not include APs, whereas the infrastructure BSS consists of an AP and all its associated clients. Transition capability.

Disabled

no

Negates or removes any configured parameter.

 

key-duration

The r1 key timeout value in seconds for decrypt-tunnel or bridge mode.

60-86400

3600

key-assignment

The list of neighbor APs for decrypt-tunnel or bridge mode.

static: Get neighbor AP list from ARMAdaptive Radio Management. ARM dynamically monitors and adjusts the network to ensure that all users are allowed ready access. It enables full utilization of the available spectrum to support maximum number of users by intelligently choosing the best RF channel and transmit power for APs in their current RF environment. or VBRVirtual Beacon Report. VBR displays a report with the MAC address details and RSSI information of an AP..

dynamic: Use all APs from ap-group as the neighbor list.

Usage Guidelines

You can enable and configure Fast BSSBasic Service Set. A BSS is a set of interconnected stations that can communicate with each other. BSS can be an independent BSS or infrastructure BSS. An independent BSS is an ad hoc network that does not include APs, whereas the infrastructure BSS consists of an AP and all its associated clients. Transition on a per Virtual AP basis. You must create an 802.11r802.11r is an IEEE standard for enabling seamless BSS transitions in a WLAN. 802.11r standard is also referred to as Fast BSS transition. profile and associate that with the Virtual AP profile through an SSIDService Set Identifier. SSID is a name given to a WLAN and is used by the client to access a WLAN network. profile.

Example

The following set of commands enable the 802.11r802.11r is an IEEE standard for enabling seamless BSS transitions in a WLAN. 802.11r standard is also referred to as Fast BSS transition. capability on the 802.11r802.11r is an IEEE standard for enabling seamless BSS transitions in a WLAN. 802.11r standard is also referred to as Fast BSS transition. profile, configures the Fast BSSBasic Service Set. A BSS is a set of interconnected stations that can communicate with each other. BSS can be an independent BSS or infrastructure BSS. An independent BSS is an ad hoc network that does not include APs, whereas the infrastructure BSS consists of an AP and all its associated clients. mobility domain ID, and specifies the r1 key time-out value.

(host) [/md] (config)#wlan dot11r-profile default

(host) [/md] (802.11r Profile "default") #fastbss-transition

(host) [/md] (802.11r Profile "default") #fastbss-mob-domain-id 25

(host) [/md] (802.11r Profile "default") #r1key_validity_duration 2500

 

Configure a mobility domain ID that uniquely identifies a mobility domain using the following command:

(host) [mynode] (802.11r Profile "default") #mob-domain-id <1-65535>

The default value is 1.

Configure the r1 key timeout value in seconds for decrypt-tunnel or bridge mode using the following command:

(host) [mynode] (802.11r Profile "default") #key_duration <60-86400>

The default value is 3600 seconds.

Apply the 802.11r profile to an SSID profile using the following command:

(host) [mynode] (config) #wlan ssid-profile voice dot11r-profile voice-enterprise

You can advertise the 802.11r capability on the Virtual AP profile by applying the SSID profile. Use the following command to apply the SSID profile to the Virtual AP profile:

(host) [mynode] (config) #wlan virtual-ap voice-AP ssid-profile voice

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Config mode on Mobility Master.

/*]]>*/