You are here: Home > CLI Commands > Just_CLI_Topics > wlan hotspot anqp-ip-addr-avail-profile

wlan hotspot anqp-ip-addr-avail-profile

wlan hotspot anqp-ip-addr-avail-profile <profile-name>

clone <profile-name>

ipv4-addr-avail {availability-unknown|not-available|port-restricted|port-restricted-ouble-nated|port-restricted-single-nated|private-double-nated|private-single-nated|public}

ipv6-addr-avail {available|availability-unknown|not-available}

no

Description

This command defines available IP address types to be sent in an Access network Query Protocol (ANQPAccess Network Query Protocol. ANQP is a query and a response protocol for Wi-Fi hotspot services. ANQP includes information Elements (IEs) that can be sent from the AP to the client to identify the AP network and service provider. The IEs typically include information about the domain name of the AP operator, the IP addresses available at the AP, and information about potential roaming partners accessible through the AP. If the client responds with a request for a specific IE, the AP will send a Generic Advertisement Service (GAS) response frame with the configured ANQP IE information.) information element in a Generic Advertisement Service (GASGeneric Advertisement Service. GAS is a request-response protocol, which provides Layer 2 transport mechanism between a wireless client and a server in the network prior to authentication. It helps in determining a wireless network infrastructure before associating clients, and allows clients to send queries to multiple 802.11 networks in parallel. ) query response.

Syntax

Parameter

Description

<profile-name>

Name of the ANQPAccess Network Query Protocol. ANQP is a query and a response protocol for Wi-Fi hotspot services. ANQP includes information Elements (IEs) that can be sent from the AP to the client to identify the AP network and service provider. The IEs typically include information about the domain name of the AP operator, the IP addresses available at the AP, and information about potential roaming partners accessible through the AP. If the client responds with a request for a specific IE, the AP will send a Generic Advertisement Service (GAS) response frame with the configured ANQP IE information. IP address availability profile.

clone <source>

Copies an existing ANQPAccess Network Query Protocol. ANQP is a query and a response protocol for Wi-Fi hotspot services. ANQP includes information Elements (IEs) that can be sent from the AP to the client to identify the AP network and service provider. The IEs typically include information about the domain name of the AP operator, the IP addresses available at the AP, and information about potential roaming partners accessible through the AP. If the client responds with a request for a specific IE, the AP will send a Generic Advertisement Service (GAS) response frame with the configured ANQP IE information. IP Address Availability profile.

ipv4-addr-avail

Indicates the availability of an IPv4 network.

availability-unknown

Network availability cannot be determined.

not-available

Network is not available.

port-restricted

Network has some ports restricted ( for example, the network blocks port 110 to restrict POP mail).

port-restricted-double-nated

Network has some ports restricted and multiple routers performing network address translation.

port-restricted-single-nated

Network has some ports restricted and a single router performing network address translation.

private-double-nated

Network is a private network with multiple routers doing network address translation.

private-single-nated

Network is a private network a single router doing network address translation.

public

Network is a public network.

ipv6-addr-avail

Indicates the availability of an IPv6 network.

available

An IPv6 network is available.

availability-unknown

Network availability cannot be determined.

not-available

Network is not available.

no

Removes an existing parameter.

Usage Guidelines

The IP Address Availability information configured using this command provides clients with information about the availability of IP address versions and types which could be allocated to those clients after they associate to the hotspotHotspot refers to a WLAN node that provides Internet connection and virtual private network (VPN) access from a given location. A business traveler, for example, with a laptop equipped for Wi-Fi can look up a local hotspot, contact it, and get connected through its network to reach the Internet. AP.

Values configured in this profile will not be sent to clients unless you:

1. Associate the ANQPAccess Network Query Protocol. ANQP is a query and a response protocol for Wi-Fi hotspot services. ANQP includes information Elements (IEs) that can be sent from the AP to the client to identify the AP network and service provider. The IEs typically include information about the domain name of the AP operator, the IP addresses available at the AP, and information about potential roaming partners accessible through the AP. If the client responds with a request for a specific IE, the AP will send a Generic Advertisement Service (GAS) response frame with the configured ANQP IE information. IP Address Availability profile with an ANQPAccess Network Query Protocol. ANQP is a query and a response protocol for Wi-Fi hotspot services. ANQP includes information Elements (IEs) that can be sent from the AP to the client to identify the AP network and service provider. The IEs typically include information about the domain name of the AP operator, the IP addresses available at the AP, and information about potential roaming partners accessible through the AP. If the client responds with a request for a specific IE, the AP will send a Generic Advertisement Service (GAS) response frame with the configured ANQP IE information. advertisement profile. (wlan hotspot advertisement profile <profile-name> anqp-ip-addr-avail-profile <profile-name> )

2. Associate the ANQPAccess Network Query Protocol. ANQP is a query and a response protocol for Wi-Fi hotspot services. ANQP includes information Elements (IEs) that can be sent from the AP to the client to identify the AP network and service provider. The IEs typically include information about the domain name of the AP operator, the IP addresses available at the AP, and information about potential roaming partners accessible through the AP. If the client responds with a request for a specific IE, the AP will send a Generic Advertisement Service (GAS) response frame with the configured ANQP IE information. advertisement profile with a HotspotHotspot refers to a WLAN node that provides Internet connection and virtual private network (VPN) access from a given location. A business traveler, for example, with a laptop equipped for Wi-Fi can look up a local hotspot, contact it, and get connected through its network to reach the Internet. profile. (wlan hotspot h2-profile advertisement-profile <profile-name>)

3. Enable the hotspotHotspot refers to a WLAN node that provides Internet connection and virtual private network (VPN) access from a given location. A business traveler, for example, with a laptop equipped for Wi-Fi can look up a local hotspot, contact it, and get connected through its network to reach the Internet. feature within that HotspotHotspot refers to a WLAN node that provides Internet connection and virtual private network (VPN) access from a given location. A business traveler, for example, with a laptop equipped for Wi-Fi can look up a local hotspot, contact it, and get connected through its network to reach the Internet. profile. (wlan hotspot h2-profile <profile-name> hotspot-enable )

Example

The following command configures an AP using this profile to advertise a public IPv4 network:

(host) [md] (config) #wlan hotspot anqp-ip-addr-avail-profile default

(host) [md] (ANQP IP Address Availability Profile "default") #ipv4-addr-avail public

(host) [md] (ANQP IP Address Availability Profile "default") #ipv6-addr-avail not-available

Command History

Version

Description

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Config mode on Mobility Master.

/*]]>*/