You are here: Home > CLI Commands > Just_CLI_Topics > wlan hotspot h2qp-conn-capability-profile

wlan hotspot h2qp-conn-capability-profile

wlan hotspot h2qp-conn-capability-profile <profile-name>

clone <source>

esp

icmp

no

tcp-ftp

tcp-http

tcp-pptp-vpn

tcp-ssh

tcp-tls-vpn

tcp-voip

udp-ike2-4500

udp-ike2-500

udp-voip

Description

This command defines an H2QPHotspot 2.0 Query Protocol. profile that advertises hotspotHotspot refers to a WLAN node that provides Internet connection and virtual private network (VPN) access from a given location. A business traveler, for example, with a laptop equipped for Wi-Fi can look up a local hotspot, contact it, and get connected through its network to reach the Internet. protocol and port capabilities.

Syntax

Parameter

Description

<profile-name>

Name of the H2QPHotspot 2.0 Query Protocol. connection capability profile.

clone <source>

Copies an existing hotspotHotspot refers to a WLAN node that provides Internet connection and virtual private network (VPN) access from a given location. A business traveler, for example, with a laptop equipped for Wi-Fi can look up a local hotspot, contact it, and get connected through its network to reach the Internet. connection capability profile.

esp

Include this parameter to enable the Encapsulating Security Payload (ESP) port used by IPsecInternet Protocol security. IPsec is a protocol suite for secure IP communications that authenticates and encrypts each IP packet in a communication session. VPNs. (port 0)

icmp

Indicates that the ICMPInternet Control Message Protocol. ICMP is an error reporting protocol. It is used by network devices such as routers, to send error messages and operational information to the source IP address when network problems prevent delivery of IP packets. port is enabled and available. (port 0)

no

Negates any existing parameter, returning it to its default disabled value.

tcp-ftp

Include this parameter to enable the FTPFile Transfer Protocol. A standard network protocol used for transferring files between a client and server on a computer network. port. (port 20)

tcp-http

Include this parameter to enable the HTTPHypertext Transfer Protocol. The HTTP is an application protocol to transfer data over the web. The HTTP protocol defines how messages are formatted and transmitted, and the actions that the w servers and browsers should take in response to various commands. port. (port 80)

tcp-pptp-vpn

Include this parameter to enable the PPTPPoint-to-Point Tunneling Protocol. PPTP is a method for implementing virtual private networks. It uses a control channel over TCP and a GRE tunnel operating to encapsulate PPP packets. port used by IPsecInternet Protocol security. IPsec is a protocol suite for secure IP communications that authenticates and encrypts each IP packet in a communication session. VPNs. (port 1723)

tcp-ssh

Include this parameter to enable the SSHSecure Shell. SSH is a network protocol that provides secure access to a remote device. port. (port 22)

tcp-tls-vpn

Include this parameter to enable the TCPTransmission Control Protocol. TCP is a communication protocol that defines the standards for establishing and maintaining network connection for applications to exchange data. TLSTransport Layer Security. TLS is a cryptographic protocol that provides communication security over the Internet. TLS encrypts the segments of network connections above the Transport Layer by using asymmetric cryptography for key exchange, symmetric encryption for privacy, and message authentication codes for message integrity. port used by VPNs. (port 80)

tcp-voip

Include this parameter to enable the TCPTransmission Control Protocol. TCP is a communication protocol that defines the standards for establishing and maintaining network connection for applications to exchange data. VoIPVoice over IP. VoIP allows transmission of voice and multimedia content over an IP network. port. (port 5060)

udp-ike2-4500

Include this parameter to enable the IKEv2Internet Key Exchange version 2. IKEv2 uses the secure channel established in Phase 1 to negotiate Security Associations on behalf of services such as IPsec. IKEv2 uses pre-shared key and Digital Signature for authentication. See RFC 4306. . (port 4500)

udp-ike2-500

Include this parameter to enable the IKEv2Internet Key Exchange version 2. IKEv2 uses the secure channel established in Phase 1 to negotiate Security Associations on behalf of services such as IPsec. IKEv2 uses pre-shared key and Digital Signature for authentication. See RFC 4306. . (port 500)

udp-voip

Include this parameter to enable the UDPUser Datagram Protocol. UDP is a part of the TCP/IP family of protocols used for data transfer. UDP is typically used for streaming media. UDP is a stateless protocol, which means it does not acknowledge that the packets being sent have been received. VoIPVoice over IP. VoIP allows transmission of voice and multimedia content over an IP network. port. (port 5060)

Usage Guidelines

The values configured in this profile can be sent in an ANQPAccess Network Query Protocol. ANQP is a query and a response protocol for Wi-Fi hotspot services. ANQP includes information Elements (IEs) that can be sent from the AP to the client to identify the AP network and service provider. The IEs typically include information about the domain name of the AP operator, the IP addresses available at the AP, and information about potential roaming partners accessible through the AP. If the client responds with a request for a specific IE, the AP will send a Generic Advertisement Service (GAS) response frame with the configured ANQP IE information. IE to provide hotspotHotspot refers to a WLAN node that provides Internet connection and virtual private network (VPN) access from a given location. A business traveler, for example, with a laptop equipped for Wi-Fi can look up a local hotspot, contact it, and get connected through its network to reach the Internet. clients information about the IP protocols and associated port numbers that are available and open for communication.

Values configured in this profile will not be sent to clients unless you:

1. Associate the H2QPHotspot 2.0 Query Protocol. profile with an ANQPAccess Network Query Protocol. ANQP is a query and a response protocol for Wi-Fi hotspot services. ANQP includes information Elements (IEs) that can be sent from the AP to the client to identify the AP network and service provider. The IEs typically include information about the domain name of the AP operator, the IP addresses available at the AP, and information about potential roaming partners accessible through the AP. If the client responds with a request for a specific IE, the AP will send a Generic Advertisement Service (GAS) response frame with the configured ANQP IE information. advertisement profile. (wlan hotspot advertisement profile <profile-name> h2qp-conn-cap-profile <profile-name> )

2. Associate the ANQPAccess Network Query Protocol. ANQP is a query and a response protocol for Wi-Fi hotspot services. ANQP includes information Elements (IEs) that can be sent from the AP to the client to identify the AP network and service provider. The IEs typically include information about the domain name of the AP operator, the IP addresses available at the AP, and information about potential roaming partners accessible through the AP. If the client responds with a request for a specific IE, the AP will send a Generic Advertisement Service (GAS) response frame with the configured ANQP IE information. advertisement profile with a HotspotHotspot refers to a WLAN node that provides Internet connection and virtual private network (VPN) access from a given location. A business traveler, for example, with a laptop equipped for Wi-Fi can look up a local hotspot, contact it, and get connected through its network to reach the Internet. profile. (wlan hotspot h2-profile advertisement-profile <profile-name> )

3. Enable the hotspotHotspot refers to a WLAN node that provides Internet connection and virtual private network (VPN) access from a given location. A business traveler, for example, with a laptop equipped for Wi-Fi can look up a local hotspot, contact it, and get connected through its network to reach the Internet. feature within that HotspotHotspot refers to a WLAN node that provides Internet connection and virtual private network (VPN) access from a given location. A business traveler, for example, with a laptop equipped for Wi-Fi can look up a local hotspot, contact it, and get connected through its network to reach the Internet. profile. (wlan hotspot h2-profile <profile-name> hotspot-enable )

Example

The following example allows the H2QPHotspot 2.0 Query Protocol. connection capability profile to advertise the availability of ICMPInternet Control Message Protocol. ICMP is an error reporting protocol. It is used by network devices such as routers, to send error messages and operational information to the source IP address when network problems prevent delivery of IP packets., HTTPHypertext Transfer Protocol. The HTTP is an application protocol to transfer data over the web. The HTTP protocol defines how messages are formatted and transmitted, and the actions that the w servers and browsers should take in response to various commands., and VOIP ports:

(host) [md] (config) #wlan hotspot h2qp-conn-capability-profile Wan1

(host) [md] (H2QP Connection Capability Profile "Wan1") #icmp

(host) [md] (H2QP Connection Capability Profile "Wan1") #http

(host) [md] (H2QP Connection Capability Profile "Wan1") # voip

(host) [md] (H2QP Connection Capability Profile "Wan1") #enable

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Config mode on Mobility Master.

/*]]>*/