You are here: Home > CLI Commands > Just_CLI_Topics > wlan hotspot h2qp-wan-metrics-profile

wlan hotspot h2qp-wan-metrics-profile

wlan hotspot h2qp-wan-metrics-profile <profile-name>

at-capacity

clone <source>

downlink-load

downlink-speed

load-dur

no

symm-link

uplink-load

uplink-speed

wan-metrics-link-status link_down|link_test|link_up|reserved

Description

This command creates an H2QPHotspot 2.0 Query Protocol. profile that specifies the hotspotHotspot refers to a WLAN node that provides Internet connection and virtual private network (VPN) access from a given location. A business traveler, for example, with a laptop equipped for Wi-Fi can look up a local hotspot, contact it, and get connected through its network to reach the Internet. WANWide Area Network. WAN is a telecommunications network or computer network that extends over a large geographical distance. status and link metrics.

Syntax

Parameter

Description

Range

Default

<profile-name>

Name of the H2QPHotspot 2.0 Query Protocol. WANWide Area Network. WAN is a telecommunications network or computer network that extends over a large geographical distance. metrics profile.

at_capacity

Use the at_capacity parameter to indicate that the WAN Link has reached its maximum capacity. If this parameter is enabled, no additional mobile devices will be permitted to associate with the hotspot AP.

enable

disable

disabled

clone <source>

Copies an existing H2QPHotspot 2.0 Query Protocol. profile.

downlink-load <load>

The percentage of the WANWide Area Network. WAN is a telecommunications network or computer network that extends over a large geographical distance. downlink that is currently utilized. If no value is set, this parameter will show a default value of 0 to indicate that the downlink speed is unknown or unspecified.

1-100

0 (unspecified)

downlink-speed <speed>

Use the downlink_speed <speed> parameter to indicate the current WANWide Area Network. WAN is a telecommunications network or computer network that extends over a large geographical distance. backhaul downlink speed in KbpsKilobits per second.. If no value is set, this parameter will show a default value of 0 to indicate that the downlink speed is unknown or unspecified.

0 - 2,147,483,647 KbpsKilobits per second.

0 (unspecified)

load-dur <load_dur>

Duration over which the downlink load is measured, in tenths of a second.

0 and 65535

0 (unspecified)

no

Negates any existing parameter

symm-link

Use the symn_link parameter to indicate that the WAN Link has same speed in both the uplink and downlink directions.

enabled

disabled

disabled

uplink-load <speed>

 

The percentage of the WAN uplink that is currently utilized. If no value is set, this parameter will show a default value of 0 to indicate that the downlink speed is unknown or unspecified.

1-100

0 (unspecified)

uplink-speed <speed>

Use the uplink <speed> parameter to indicate the current WAN backhaul uplink speed in Kbps. If no value is set, this parameter will show a default value of 0 to indicate that the uplink speed is unknown or unspecified.

0 - 2,147,483,647 kbps

0 (unspecified)

wan-metrics-link-status

Define the status of the WAN Link by configuring one of the following values. The default link status is reserved, which indicates that the link status is unknown or unspecified.

link_down

link_test

link_up

reserved

reserved

link_down

WANWide Area Network. WAN is a telecommunications network or computer network that extends over a large geographical distance. link is down.

link_test

WANWide Area Network. WAN is a telecommunications network or computer network that extends over a large geographical distance. link is currently in a test state.

link_up

WANWide Area Network. WAN is a telecommunications network or computer network that extends over a large geographical distance. link is up.

reserved

This parameter is reserved by the HotspotHotspot refers to a WLAN node that provides Internet connection and virtual private network (VPN) access from a given location. A business traveler, for example, with a laptop equipped for Wi-Fi can look up a local hotspot, contact it, and get connected through its network to reach the Internet. 2.0 specification, and cannot be configured. This is the default link status.

Usage Guidelines

The values configured in this profile can be sent in an ANQPAccess Network Query Protocol. ANQP is a query and a response protocol for Wi-Fi hotspot services. ANQP includes information Elements (IEs) that can be sent from the AP to the client to identify the AP network and service provider. The IEs typically include information about the domain name of the AP operator, the IP addresses available at the AP, and information about potential roaming partners accessible through the AP. If the client responds with a request for a specific IE, the AP will send a Generic Advertisement Service (GAS) response frame with the configured ANQP IE information. IE to provide hotspotHotspot refers to a WLAN node that provides Internet connection and virtual private network (VPN) access from a given location. A business traveler, for example, with a laptop equipped for Wi-Fi can look up a local hotspot, contact it, and get connected through its network to reach the Internet. clients information about access network characteristics such as link status and the capacity and speed of the WANWide Area Network. WAN is a telecommunications network or computer network that extends over a large geographical distance. link to the Internet.Issue this command without the <profile-name> parameter to display the entire WAN metrics profile list, including profile status and the number of references to each profile. Include a profile name to display detailed configuration information for that profile.

Examples

The example below shows that three WAN metrics profiles are configured. The References column lists the number of other profiles with references to the operator-friendly name profile, and the Profile Status column indicates whether the profile is predefined. User-defined profiles will not have an entry in the Profile Status column.

(host) [md] #show wlan hotspot h2qp-wan-metrics-profile

H2QP WAN Metrics Profile List

-----------------------------

Name References Profile Status

---- ---------- --------------

default 0

WanFastlink

 

Total:1

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Config mode on Mobility Master.

/*]]>*/