You are here: Home > CLI Commands > Just_CLI_Topics > wlan hotspot h2qp-op-cl-profile

wlan hotspot h2qp-op-cl-profile

wlan hotspot h2qp-op-cl-profile <profile-name>

clone <source>

no

op-cl <op-cl>

Description

This command defines an H2QPHotspot 2.0 Query Protocol. profile that defines the Operating Class to be sent in the ANQPAccess Network Query Protocol. ANQP is a query and a response protocol for Wi-Fi hotspot services. ANQP includes information Elements (IEs) that can be sent from the AP to the client to identify the AP network and service provider. The IEs typically include information about the domain name of the AP operator, the IP addresses available at the AP, and information about potential roaming partners accessible through the AP. If the client responds with a request for a specific IE, the AP will send a Generic Advertisement Service (GAS) response frame with the configured ANQP IE information. IE.

Syntax

Parameter

Description

<profile-name>

Name of the H2QPHotspot 2.0 Query Protocol. operating class indication profile.

clone <source>

Copies an existing hotspotHotspot refers to a WLAN node that provides Internet connection and virtual private network (VPN) access from a given location. A business traveler, for example, with a laptop equipped for Wi-Fi can look up a local hotspot, contact it, and get connected through its network to reach the Internet. operating class profile.

no

Negates any existing parameter, returning it to its default disabled value.

op-cl <op-cl>

Configures the operating class for the devices’ BSSBasic Service Set. A BSS is a set of interconnected stations that can communicate with each other. BSS can be an independent BSS or infrastructure BSS. An independent BSS is an ad hoc network that does not include APs, whereas the infrastructure BSS consists of an AP and all its associated clients. . The supported range for this field is 1-255, and the default value is 1.

Usage Guidelines

The values configured in this H2QPHotspot 2.0 Query Protocol. Operating Class profile define the channels on which the hotspotHotspot refers to a WLAN node that provides Internet connection and virtual private network (VPN) access from a given location. A business traveler, for example, with a laptop equipped for Wi-Fi can look up a local hotspot, contact it, and get connected through its network to reach the Internet. is capable of operating. It may be useful where, for instance, a mobile device discovers a hotspotHotspot refers to a WLAN node that provides Internet connection and virtual private network (VPN) access from a given location. A business traveler, for example, with a laptop equipped for Wi-Fi can look up a local hotspot, contact it, and get connected through its network to reach the Internet. in the 2.4 GHzGigahertz. bandBand refers to a specified range of frequencies of electromagnetic radiation. but finds it is dual-bandBand refers to a specified range of frequencies of electromagnetic radiation. and prefers the 5 GHzGigahertz. bandBand refers to a specified range of frequencies of electromagnetic radiation.. For a definition of these global operating classes, refer to Table E-4 of IEEEInstitute of Electrical and Electronics Engineers. Std 802.11802.11 is an evolving family of specifications for wireless LANs developed by a working group of the Institute of Electrical and Electronics Engineers (IEEE). 802.11 standards use the Ethernet protocol and Carrier Sense Multiple Access with collision avoidance (CSMA/CA) for path sharing.-2012, Annex E.

Values configured in this profile will not be sent to clients unless you:

1. Associate the H2QPHotspot 2.0 Query Protocol. profile with an ANQPAccess Network Query Protocol. ANQP is a query and a response protocol for Wi-Fi hotspot services. ANQP includes information Elements (IEs) that can be sent from the AP to the client to identify the AP network and service provider. The IEs typically include information about the domain name of the AP operator, the IP addresses available at the AP, and information about potential roaming partners accessible through the AP. If the client responds with a request for a specific IE, the AP will send a Generic Advertisement Service (GAS) response frame with the configured ANQP IE information. advertisement profile. (wlan hotspot advertisement profile <profile-name> h2qp-op-cl-profile <profile-name> )

2. Associate the ANQPAccess Network Query Protocol. ANQP is a query and a response protocol for Wi-Fi hotspot services. ANQP includes information Elements (IEs) that can be sent from the AP to the client to identify the AP network and service provider. The IEs typically include information about the domain name of the AP operator, the IP addresses available at the AP, and information about potential roaming partners accessible through the AP. If the client responds with a request for a specific IE, the AP will send a Generic Advertisement Service (GAS) response frame with the configured ANQP IE information. advertisement profile with a HotspotHotspot refers to a WLAN node that provides Internet connection and virtual private network (VPN) access from a given location. A business traveler, for example, with a laptop equipped for Wi-Fi can look up a local hotspot, contact it, and get connected through its network to reach the Internet. profile. (wlan hotspot h2-profile advertisement-profile <profile-name> )

3. Enable the hotspotHotspot refers to a WLAN node that provides Internet connection and virtual private network (VPN) access from a given location. A business traveler, for example, with a laptop equipped for Wi-Fi can look up a local hotspot, contact it, and get connected through its network to reach the Internet. feature within that HotspotHotspot refers to a WLAN node that provides Internet connection and virtual private network (VPN) access from a given location. A business traveler, for example, with a laptop equipped for Wi-Fi can look up a local hotspot, contact it, and get connected through its network to reach the Internet. profile. (wlan hotspot h2-profile <profile-name> hotspot-enable )

Example

The following example configures and enables a profile with the default operating class value:

(host) [md] (config) #wlan hotspot h2qp-op-cl-profile profile1

(host) [md] (H2QP Operating Class Indication Profile "profile1") #op-cl 1

(host) [md] (H2QP Operating Class Indication Profile "profile1") #enable

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Config mode on Mobility Master.

/*]]>*/