You are here: Home > CLI Commands > Just_CLI_Topics > wlan hotspot h2qp-operator-friendly-name-profile

wlan hotspot h2qp-operator-friendly-name-profile

wlan hotspot h2qp-operator-friendly-name-profile <profile-name>

clone <source>

no

op-fr-name <op-fr-name>

op-fr-name-hex <op-fr-name-hex>

op-lang-code <op-lang-code>

Description

This command defines an H2QPHotspot 2.0 Query Protocol. operator-friendly name profile.

Syntax

Parameter

Description

<profile-name>

H2QPHotspot 2.0 Query Protocol. operator friendly name profile.

clone <source>

Copies an existing operator-friendly name profile.

no

Negates any existing parameter.

op-fr-name <op-fr-name>

An operator-friendly name sent by devices using this profile. The name can be up to 64 alphanumeric characters, and can include special characters and spaces. If the name includes quotation marks (“), you must include a backslash character (\) before each quotation mark. (e.g. \"example\")

op-fr-name-hex <op-fr-name-hex>

Operator Friendly Name in HEX.

op-lang-code <op-lang-code>

An ISO 639 language code that identifies the language used in the op-fr-name field.

Usage Guidelines

The operator-friendly name configured in this profile is a free-form text field that can identify the operator and also something about the location.

Values configured in this profile will not be sent to clients unless you:

1. Associate the H2QPHotspot 2.0 Query Protocol. operator-friendly name profile with an ANQPAccess Network Query Protocol. ANQP is a query and a response protocol for Wi-Fi hotspot services. ANQP includes information Elements (IEs) that can be sent from the AP to the client to identify the AP network and service provider. The IEs typically include information about the domain name of the AP operator, the IP addresses available at the AP, and information about potential roaming partners accessible through the AP. If the client responds with a request for a specific IE, the AP will send a Generic Advertisement Service (GAS) response frame with the configured ANQP IE information. advertisement profile. (wlan hotspot advertisement profile <profile-name>h2qp-operator-friendly-profile <profile-name>)

2. Associate the ANQPAccess Network Query Protocol. ANQP is a query and a response protocol for Wi-Fi hotspot services. ANQP includes information Elements (IEs) that can be sent from the AP to the client to identify the AP network and service provider. The IEs typically include information about the domain name of the AP operator, the IP addresses available at the AP, and information about potential roaming partners accessible through the AP. If the client responds with a request for a specific IE, the AP will send a Generic Advertisement Service (GAS) response frame with the configured ANQP IE information. advertisement profile with a HotspotHotspot refers to a WLAN node that provides Internet connection and virtual private network (VPN) access from a given location. A business traveler, for example, with a laptop equipped for Wi-Fi can look up a local hotspot, contact it, and get connected through its network to reach the Internet. profile. (wlan hotspot h2-profile advertisement-profile <profile-name>)

3. Enable the hotspotHotspot refers to a WLAN node that provides Internet connection and virtual private network (VPN) access from a given location. A business traveler, for example, with a laptop equipped for Wi-Fi can look up a local hotspot, contact it, and get connected through its network to reach the Internet. feature within that HotspotHotspot refers to a WLAN node that provides Internet connection and virtual private network (VPN) access from a given location. A business traveler, for example, with a laptop equipped for Wi-Fi can look up a local hotspot, contact it, and get connected through its network to reach the Internet. profile. (wlan hotspot h2-profile <profile-name>hotspot-enable)

Example

The example below shows that the managed device has two configured operator friendly name profiles. The References column lists the number of other profiles with references to the operator friendly name profile, and the Profile Status column indicates whether the profile is predefined. User-defined profiles will not have an entry in the Profile Status column.

(host) [md] (config) #wlan hotspot h2qp-operator-friendly-name-profile profile1

(host) [md] (H2QP Operator Friendly Name Profile "profile1") #op-fr-name my_hotspot

(host) [md] (H2QP Operator Friendly Name Profile "profile1") #op-lang-code <op-lang-code>

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Config mode on Mobility Master.

/*]]>*/