You are here: Home > CLI Commands > Just_CLI_Topics > wlan-he-ssid-profile

wlan he-ssid-profile

wlan he-ssid-profile <profile-name>

clone

dynamic-fragmentation-level <dynamic-fragmentation-level>

he-duration-based-rts <he-duration-based-rts>

high-efficiency-enable

no...

Description

This command configures a high-efficiency SSIDService Set Identifier. SSID is a name given to a WLAN and is used by the client to access a WLAN network. profile.

Syntax

Parameter

Description

Range

Default

<profile-name>

Name of this instance of the profile. The name must be 1-63 characters.

“default”

clone

Name of an existing high-efficiency SSIDService Set Identifier. SSID is a name given to a WLAN and is used by the client to access a WLAN network. profile from which parameter values are copied.

dynamic-fragmentation-level <dynamic-fragmentation-level>

Controls the level of Dynamic fragmentation that is supported by the APs. Enter one of the following values:

0: Does not support Dynamic Fragmentation

1: Support for dynamic fragments that are contained within an S-MPDUMAC Protocol Data Unit. MPDU is a message exchanged between MAC entities in a communication system based on the layered OSI model.. It does not support dynamic fragment within an A-MPDUMAC Protocol Data Unit. MPDU is a message exchanged between MAC entities in a communication system based on the layered OSI model. that is not an S-MPDUMAC Protocol Data Unit. MPDU is a message exchanged between MAC entities in a communication system based on the layered OSI model..

2: Support for dynamic fragments that are contained within an S-MPDUMAC Protocol Data Unit. MPDU is a message exchanged between MAC entities in a communication system based on the layered OSI model., and support for up to one dynamic fragment for each MSDU within an A-MPDUMAC Protocol Data Unit. MPDU is a message exchanged between MAC entities in a communication system based on the layered OSI model..

3: Support for dynamic fragments that are contained within an S-MPDUMAC Protocol Data Unit. MPDU is a message exchanged between MAC entities in a communication system based on the layered OSI model., and support for up to four dynamic fragments for each MSDU within an A-MPDUMAC Protocol Data Unit. MPDU is a message exchanged between MAC entities in a communication system based on the layered OSI model..

0-3

0

he-duration-based-rts <he-duration-based-rts>

Indicates the duration-based RTSRequest to Send. RTS refers to the data transmission and protection mechanism used by the 802.11 wireless networking protocol to prevent frame collision occurrences. See CTS. value, in microseconds, in the HE capability. When the Transmission Opportunity (TXOPTransmission Opportunity. TXOP is used in wireless networks supporting the IEEE 802.11e Quality of Service (QoS) standard. Used in both EDCA and HCF Controlled Channel Access modes of operation, TXOP is a bounded time interval in which stations supporting QoS are permitted to transfer a series of frames. TXOP is defined by a start time and a maximum duration.) is greater than the configured duration-based RTSRequest to Send. RTS refers to the data transmission and protection mechanism used by the 802.11 wireless networking protocol to prevent frame collision occurrences. See CTS. value, RTSRequest to Send. RTS refers to the data transmission and protection mechanism used by the 802.11 wireless networking protocol to prevent frame collision occurrences. See CTS./CTSClear to Send. The CTS refers to the data transmission and protection mechanism used by the 802.11 wireless networking protocol to prevent frame collision occurrences. See RTS. exchange value is used.

0-1023

1023

high-efficiency-enable

Enables or disables high-efficiency (802.11ax) features in SSIDService Set Identifier. SSID is a name given to a WLAN and is used by the client to access a WLAN network..

enabled

no

Negates any configured parameter.

Usage Guidelines

The wlan he-ssid profile configures the high-efficiency SSIDService Set Identifier. SSID is a name given to a WLAN and is used by the client to access a WLAN network..

Example

The following command configures the dynamic fragmentation level supported by the AP for the default high-efficiency SSIDService Set Identifier. SSID is a name given to a WLAN and is used by the client to access a WLAN network.:

(host) [md] (config) #wlan he-ssid-profile default

(host) [md] (High-efficiency SSID profile "default") #dynamic-fragmentation-level 2

Command History

Release

Modification

ArubaOS 8.4.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms, but only operates with 802.11ax-capable APs.

Base operating system.

Config mode on Mobility Master.

/*]]>*/