You are here: Home > CLI Commands > Just_CLI_Topics > wlan rrm-ie-profile

wlan rrm-ie-profile

wlan rrm-ie-profile <profile-name>

bss-aac-ie

clone

country-ie

enabled-capabilities-ie

no

pwr-constraint-ie

qbss-load-ie

quiet-ie

tpc-report-ie

Description

This command configures a radio resource management (RRM) IE profile to define the information elements advertised by an AP with 802.11k802.11k is an IEEE standard that enables APs and client devices to discover the best available radio resources for seamless BSS transition in a WLAN. support enabled.

Syntax

Parameter

Description

bss-aac-ie

The AP will advertise in beacon and probe responses the BSSBasic Service Set. A BSS is a set of interconnected stations that can communicate with each other. BSS can be an independent BSS or infrastructure BSS. An independent BSS is an ad hoc network that does not include APs, whereas the infrastructure BSS consists of an AP and all its associated clients. Available Admission Capacity IE, which contains information about the admission capabilities for each User Priority or ACAccess Category. As per the IEEE 802.11e standards, AC refers to various levels of traffic prioritization in Enhanced Distributed Channel Access (EDCA) operation mode. The WLAN applications prioritize traffic based on the Background, Best Effort, Video, and Voice access categories. AC can also refer to Alternating Current, a form of electric energy that flows when the appliances are plugged to a wall socket..

clone

Copy the settings of an existing RRM IE profile.

country-ie

The AP will advertise in beacon and probe responses the device's regulatory domain.

enabled-capabilities-ie

The AP will advertise in beacon and probe responses support for radio measurements in a device.

no ...

Disables the transmission of an IE in this profile.

pwr-constraint-ie

The AP will advertise in beacon and probe responses the regulatory maximum transmit power for that current channel.

qbss-load-ie

The AP will advertise in beacon and probe responses the QBSS Load IE, which contains information on the current station count, channel utilization and available admission capacity levels in the QBSS.

quiet-ie

The AP will advertise in beacon and probe responses the Quiet IE, which is used to silence the channel for measurement purposes. When an AP uses a quiet IE to schedule a quiet interval, stations may not transmit on that channel during the quiet interval.

tpc-report-ie

The AP will advertise in beacon and probe responses information about its TCPTransmission Control Protocol. TCP is a communication protocol that defines the standards for establishing and maintaining network connection for applications to exchange data. .

Usage Guidelines

ArubaOS supports RRM IEs for APs with 802.11k802.11k is an IEEE standard that enables APs and client devices to discover the best available radio resources for seamless BSS transition in a WLAN. support enabled. All IEs are sent by default.

Example

The following command prevents the AP from advertising the country IE:

(host) [md] (config) #wlan rrm-ie-profile default

(host) [md] (RRM IE Profile "default") #no country-ie

Command History

Release

Description

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Config mode on Mobility Master.

/*]]>*/