You are here: Home > CLI Commands > Just_CLI_Topics > wlan tsm-req-profile

wlan tsm-req-profile

wlan tsm-req-profile <profle-name>

bin0-range <bin0-range>

clone

dur-mandatory

measure-duration <measure-duration>

no

num-repeats <num-repeats>

random-interval <random-interval>

request-mode {normal | triggered}

traffic-id <traffic-id>

Description

This command configures a TSM Report Request Profile.

Syntax

Parameter

Description

Range

Default

<profile-name>

Name of this profile. The name must be 1-63 characters.

default

bin0-range <bin0-range>

This value is used to set the 'Bin 0 Range' field in the Transmit Stream or Category Measurement Request frame. Bin 0 Range indicates the delay range of the first bin (Bin 0) of the Transmit Delay Histogram, expressed in units of TUs.

0- 255

6

clone <source>

Creates a copy of the Transmit Stream Measurement Request Report Request Profile.

<source> is the name of an existing TSM Profile from which parameter values are copied.

dur-mandatory

This parameter is used to set the "Duration Mandatory" bit of the Measurement Request Mode field of the Transmit Stream or Category Measurement Request frame.

Enabled

measure-duration <measure-duration>

This parameter is used to set the Measurement Duration field in the Transmit Stream or Category Measurement Request frame. The Measurement Duration is set to the duration of the requested measurement. It is expressed in units of TUs. When the request mode for the Transmit Stream or Category Measurement Request frame is set to triggered, the Measurement Duration field should be set to 0.

0- 65535

9776

no

Negates any configured parameter

num-repeats <num-repeats>

This parameter is used to set the Number of Repetitions field in the Transmit Stream or Category Measurement Request frame. The Number of Repetitions field contains the requested number of repetitions for all the Measurement Request elements in this frame. A value of zero in the Number of Repetitions field indicates Measurement Request elements are executed once without repetition. A value of 65535 in the Number of Repetitions field indicates Measurement Request elements are repeated until the measurement is canceled or superseded.

0-65535

65535

random-interval <random-interval>

This parameter is used to set the Randomization Interval field in the Transmit Stream or Category Measurement Request frame. The Randomization Interval is used to specify the desired maximum random delay in the measurement start time. It is expressed in units of TUs (Time Units). When the request mode for the Transmit Stream or Category Measurement Request frame is set to "triggered", the Randomization Interval is not used and is set to 0. A Randomization Interval of 0 in a measurement request indicates that no random delay is to be used.

0-65535

0

request-mode {normal | triggered}

This parameter is used to determine the request mode for the Transmit Stream or Category Measurement Request frame. There are two options for this field:

normal

triggered

normal

traffic-id <traffic-id>

The parameter is used to set the Traffic Identifier field in the Transmit Stream or Category Measurement Request frame. The Traffic Identifier field contains the TID subfield. The TID subfield indicates the TC or TS for which traffic is to be measured.

0-255

96

Usage Guidelines

The tsm-req-profile is a part of the 802.11K profile. It is used to configure the parameters for the Transmit Stream or Category Measurement frames. It takes effect only when the 802.11K feature is enabled.

Example

(host) [md] (config) #wlan tsm-req-profile default

(host) [md] (TSM Report Request Profile "default") #bin0-range 1

(host) [md] (TSM Report Request Profile "default") #dur-mandatory

(host) [md] (TSM Report Request Profile "default") #measure-duration 25

(host) [md] (TSM Report Request Profile "default") #num-repeats 0

(host) [md] (TSM Report Request Profile "default") #random-interval 0

(host) [md] (TSM Report Request Profile "default") #request-mode normal

(host) [md] (TSM Report Request Profile "default") #traffic-id 96

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Configuration mode on Mobility Master.

/*]]>*/