You are here: Home > Configuring ArubaOS Features > Managed Devices > Managed Device WAN Dashboard

Managed Device WAN Dashboard

The WAN dashboard, in the Monitoring section of the WebUI, is the default landing page for a managed device with uplinks defined via the uplink manager. Starting with ArubaOS 8.1.0.0, the WANWide Area Network. WAN is a telecommunications network or computer network that extends over a large geographical distance. dashboard also appears in the Mobility Master WebUI when a branch office controller is selected in the network hierarchy.

 

For more information on defining a WANWide Area Network. WAN is a telecommunications network or computer network that extends over a large geographical distance. uplink, see Uplink Monitoring and Load Balancing  . For information on enabling and the uplink health check features, see Health Check Services for Managed Devices.

The WANWide Area Network. WAN is a telecommunications network or computer network that extends over a large geographical distance. dashboard provides the WANWide Area Network. WAN is a telecommunications network or computer network that extends over a large geographical distance. summary details for uplink VLANsVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN., and contains the following tables:

Uplinks: This section displays the link status and WAN status for VLANsVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. monitored using the uplink manager utility. For each VLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN., the green check mark icon indicates an up status and red down arrow represents a down status for the link and WANWide Area Network. WAN is a telecommunications network or computer network that extends over a large geographical distance.. The uplink health-check feature is disabled by default on managed devices. If it is enabled , the WANWide Area Network. WAN is a telecommunications network or computer network that extends over a large geographical distance. status link will appear with a yellow icon, indicating that this feature is in an error state.

Health Score: The health score rates the health of the uplink on a scale of 1-5, with score of 1 being lower quality and a score of 5 being the highest quality.

Throughput: Displays the inbound and outbound traffic rates for the selected uplink.

Latency & Jitter: Jitter is a variation in the delay times of received packets. If the jitter measurement option is enabled in the uplink manger, the uplink manger uses UDPUser Datagram Protocol. UDP is a part of the TCP/IP family of protocols used for data transfer. UDP is typically used for streaming media. UDP is a stateless protocol, which means it does not acknowledge that the packets being sent have been received. packets on UDPUser Datagram Protocol. UDP is a part of the TCP/IP family of protocols used for data transfer. UDP is typically used for streaming media. UDP is a stateless protocol, which means it does not acknowledge that the packets being sent have been received. port 4500 to measure jitter on the WANWide Area Network. WAN is a telecommunications network or computer network that extends over a large geographical distance. links, and includes jitter statistics in the uplink quality calculations. Jitter statistics will not be measured if jitter measurement is not enabled in the uplink manager settings. For details on enabling and disabling uplink jitter measurements, see Uplink Monitoring and Load Balancing .

Aggregate Compression: Displays the aggregate percentage compression on all VLANsVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. with the compression feature enabled.

Figure 1  WAN Monitoring Dashboard

/*]]>*/