Configuring Static IP Routes

The following procedure configures a static IP route (like a default route) on a Mobility Master:

1. In the Mobility Master node hierarchy, navigate to the Configuration > Interfaces > IP Routes tab.

2. Expand the IP Routes section.

3. Click + to add a static route to a destination network or host.

4. Select the IP Version.

5. Enter the Destination IP address and Destination network mask ( for a host route)

6. Select a forwarding setting:

Using Forwarding Router Address: Enter the nexthop IP address in dotted decimal format (A.B.C.D). Optionally, enter the distance metric (cost) for this route. The cost prioritizes routing to the destination. The lower the cost, the higher the priority.

Using Null Interface: Designate a null interface.

7. Enter the Next hop IP address and Cost.

8. Click Submit.

9. Click Pending Changes.

10. In the Pending Changes window, select the check box and click Deploy changes.

The following CLI Command-Line Interface. A console interface with a command line shell that allows users to execute text input as commands and convert these commands to appropriate functions. command configures a static IP route on a Mobility Master:

(host) [mynode] (config) #ip route <destip> <destmask> {ipsec <name> [<cost>]|null <0-0>|<nexthop> [<cost>]}