Configuring Upgrade Profile of Managed Device

The following procedure describes how to configure an upgrade profile for a managed device:

  1. In the Managed Network node hierarchy, navigate to Configuration > System > Profiles.
  2. Under All Profiles, select Controller Profile > Upgrade.
  3. Under Upgrade Profile, configure the parameters listed in the following table.

Table 1: Upgrade Profile Parameters for Managed Device

Parameter

Description

Server IP address

Specify the IPv4 address of the image server. This parameter is only used by managed devices running versions prior to ArubaOS 8.2 and accepts only IPv4 address.

NOTE: For FTP File Transfer Protocol. A standard network protocol used for transferring files between a client and server on a computer network.  or SCP Secure Copy Protocol. SCP is a network protocol that supports file transfers between hosts on a network. protocol, specify the username and password.

Server IPv4/IPv6 address

Specify the IPv4 or IPv6 address of the image server. This parameter is only used by managed devices running version ArubaOS 8.2.0.0 or later versions.

NOTE: For FTP File Transfer Protocol. A standard network protocol used for transferring files between a client and server on a computer network.  or SCP Secure Copy Protocol. SCP is a network protocol that supports file transfers between hosts on a network. protocol, specify the username and password.

User name

Specify the username of the image server.

Password

Specify the password of the image server.

Retype

Repeat the password of the image server.

Protocol

Select the protocol used to download the image file from the image server to the managed devices.

tftp

ftp

scp

NOTE: Select none for local file.

File path

Specify the path of the image file on the image server.

  1. Click Submit.
  2. Click Pending Changes.
  3. In the Pending Changes window, select the required check box and click Deploy changes.

The following CLI Command-Line Interface. A console interface with a command line shell that allows users to execute text input as commands and convert these commands to appropriate functions. command configures the upgrade-profile:

(host) [md] (config)#upgrade-profile

The following CLI Command-Line Interface. A console interface with a command line shell that allows users to execute text input as commands and convert these commands to appropriate functions. command upgrades the managed device from the Mobility Master in a native IPv6 deployment:

(host) [mynode] #upgrade managed-devices copy-reboot configured-fileserver version <img-version>

The following CLI Command-Line Interface. A console interface with a command line shell that allows users to execute text input as commands and convert these commands to appropriate functions. command initiates upgrade on all managed devices from the Mobility Master in a native IPv6 deployment:

(host) [mynode] #upgrade managed-devices copy-reboot fileserver scp <imagehost> <username> . version <img-version> all