show radio config

show radio config

Description

This command displays the 2.4 GHz and 5 GHz radio configuration details for an AP.

Example

The following example displays the output of show radio config command.

show radio config

-----------------------------------------------------------

2.4 GHz:

Profile Name:default

Zone Name:

Legacy Mode:disable

Single Chain Legacy:disable

Beacon Interval:100

802.11b-protection:enable

802.11d/802.11h:disable

Interference Immunity Level:2

Channel Switch Announcement Count:0

MAX Distance:0

Channel Reuse Type:disable

Channel Reuse Threshold:0

Background Spectrum Monitor:disable

Max Tx Power:12

Min Tx Power:6

Cell Size Reduction:0

Smart Antenna:disable

WIDS Override:dynamic

40MHZ intolerance:disable

Honor 40MHZ intolerance:enable

Channel quality threshold:70

Channel quality wait time:120

High noise backoff time:720

Max channel bandwidth:40MHz

Min channel bandwidth:20MHz

Allowed channels:1,2,3,4,5,6,7,8,9,10,11

BSS Color:0

BSS Color Switch Countdown:10

Free Channel Index:25

Scanning-disable:Yes

Aggressive-scan:enable

Active-scan:disable

IoT Coexistence :enable

RTS Mode:default

-----------------------------------------------------------

5.0 GHz:

Profile Name:default

Zone Name:

Very High Throughput:enable

Legacy Mode:disable

Single Chain Legacy:disable

Beacon Interval:100

802.11d/802.11h:disable

Interference Immunity Level:2

Channel Switch Announcement Count:0

MAX Distance:0

Channel Reuse Type:disable

Channel Reuse Threshold:0

Background Spectrum Monitor:disable

Max Tx Power:21

Min Tx Power:15

Cell Size Reduction:0

Smart Antenna:disable

WIDS Override:dynamic

Channel quality threshold:70

Channel quality wait time:120

High noise backoff time:720

Max channel bandwidth:160MHz

Min channel bandwidth:20MHz

Radar backoff time:720

Allowed channels:40,44,48,52,56,60,64,100,104,108,112,116,120,124,128,132,136,140,144,149,153,157,161,165,169,173,177

BSS Color:0

BSS Color Switch Countdown:10

Free Channel Index:25

Scanning-disable:Yes

Aggressive-scan:enable

Active-scan:disable

Zero Wait DFS:disable

Frame Bursting Mode:dynamic

RTS Mode:default

VHT Bw Signaling:disable

VHT Txbf Sounding Interval:0

-----------------------------------------------------------

Secondary 5.0 GHz:

Profile Name:default

Zone Name:

Very High Throughput:enable

Legacy Mode:disable

Single Chain Legacy:disable

Beacon Interval:100

802.11d/802.11h:disable

Interference Immunity Level:2

Channel Switch Announcement Count:0

MAX Distance:0

Channel Reuse Type:disable

Channel Reuse Threshold:0

Background Spectrum Monitor:disable

Max Tx Power:21

Min Tx Power:15

Cell Size Reduction:0

Smart Antenna:disable

WIDS Override:dynamic

Channel quality threshold:70

Channel quality wait time:120

High noise backoff time:720

Max channel bandwidth:160MHz

Min channel bandwidth:20MHz

Radar backoff time:720

Allowed channels:40,44,48,52,56,60,64,100,104,108,112,116,120,124,128,132,136,140,144,149,153,157,161,165,169,173,177

BSS Color:0

BSS Color Switch Countdown:10

Free Channel Index:25

Scanning-disable:Yes

Aggressive-scan:enable

Active-scan:disable

Zero Wait DFS:disable

Frame Bursting Mode:dynamic

RTS Mode:default

VHT Bw Signaling:disable

VHT Txbf Sounding Interval:0

-----------------------------------------------------------

6.0 GHz:

Profile Name:default

Zone Name:

Legacy Mode:disable

Beacon Interval:100

802.11d/802.11h:enable

Channel Switch Announcement Count:0

MAX Distance:0

Background Spectrum Monitor:disable

Max Tx Power:21

Min Tx Power:16

WIDS Override:off

BSS Color:0

BSS Color Switch Countdown:10

Free Channel Index:25

HE TXBF:enable

HE MU-OFDMA:enable

HE MU-MIMO:enable

HE UL MU-MIMO:disable

Individual TWT:enable

HE duration based RTS:1023

HE Guard Interval:800ns,1600ns,3200ns

HE Supported MCS map:11,11,11,11,11,11,11,11

Dynamic fragmentation level:level-0

FILS:disable

Basic-rates:6,12,24

Tx-rates:6,9,12,18,24,36,48,54

Beacon-rate:default

Enable Agile Multiband (MBO):disable

Advertise 802.11k Capability:disable

RRM IE Settings Profile:default

Advertise AP Name:disable

Channel quality threshold:70

Channel quality wait time:120

High noise backoff time:720

Max channel bandwidth:160MHz

Min channel bandwidth:20MHz

Allowed channels:1,5,9,13,17,21,25,29,33,37,41,45,49,53,57,61,65,69,73,77,81,85,89,93,97,101,105,109,113,117,121,125,129,133,137,

141,145,149,153,157,161,165,169,173,177,181,185,189,193,197,201,205,209,213,217,221,225,229,233

Frame Bursting Mode:dynamic

RTS Mode:default

The output of this command provides the following information:

Parameter

Description

Legacy Mode

Indicates if the legacy mode is enabled on the APs to run the radio in the non-802.11n mode.

Beacon Interval

Displays beacon interval for the AP in milliseconds. When beacon interval is configured, the 802.11 beacon management frames are transmitted by the access point at the specified interval.

802.11d/802.11h

Displays if the AP is allowed advertise its 802.11d (country information) and 802.11h capabilities.

Interference Immunity Level

Displays the immunity level configured for an AP radio profile to improve performance in high-interference environments.

Channel Switch Announcement Count

Displays the number of channel switching announcements that are sent before switching to a new channel.

MAX distance

Indicates the maximum distance in meters between a client and an AP or between a mesh point and a mesh portal.

Channel Reuse Type

Indicates if channel reuse type is enabled.

Channel Reuse Threshold

Displays the channel reuse threshold configured for channel reuse type.

Background Spectrum Monitor

Indicates background spectrum monitoring is enabled. When enabled, the APs in access mode continue with normal access service to clients, while performing additional function of monitoring RF interference (from both neighboring APs and non Wi-Fi sources such as, microwaves and cordless phones) on the channel they are currently serving clients.

Standalone Spectrum

Indicates the portion of the channel (upper, middle, or lower) that is being monitored on the 5 GHz band.

Cell Size Reduction

Indicates the Rx sensitivity values configured on the 2.4 GHz and 5.0 GHz radio profiles.

Frame Bursting Mode

Displays the frame bursting mode configured for the AP.

  • Dynamic: Frame bursting is enabled only when one active client is connected to the AP, and frame bursting is disabled when there is more than one active client.
  • OFF: Frame bursting mode is always disabled.
  • ON: Frame bursting mode is always enabled.

RTS Mode

Displays the RTS mode configured to control RTS frame transmission to the clients.

  • always-enable: RTS is used for every PPDU/ A-MPDU transmission.
  • always-disable: RTS is not used for any transmission.
  • default: The default RTS mode configured in the wireless driver of the AP is used.

Command History

Release

Modification

ArubaOS 10.3.1.0

Command introduced.