What's New in ArubaOS 10.5.0.0

This section lists the commands introduced, modified, or deprecated in ArubaOS 10.5.0.0.

New Commands in ArubaOS 10.5.0.0

The following commands were introduced in ArubaOS 10.5.0.0.

Command

Description

show ap onboarding event

This command displays the details of onboarding event history when a device connects to the network.

show ap onboarding status

This command displays the status of onboarding events when a device connects to the network.

show ap debug cloud-restore-status

This command displays the status of the AP configuration restoration on the Central server.

show dot1x eap-frag-mtu

This command displays the displays the size of the EAP Fragmentation MTU.

show lhm status

This command displays the number of times all configured policies on an AP have run.

show routing-profile

This command displays all global static route status configured on an AP under routing-profile.

show ap monitor ap-list containment-exclusion

This command displays the details of the APs exempted from containment.

show aaa authentication via global-config

This command displays the details of the VIA global configuration.

Modified Commands in ArubaOS 10.5.0.0

The following commands were modified in ArubaOS 10.5.0.0.

Command

Description

show ap monitor status

The following parameters were introduced:

  • Dropped AWDL frames
  • Detected AWDL frames

show lc-cluster vlan-probe

The following parameters were introduced:

  • Peer Address
  • Total
  • First 20 Failed Vlans

show radio config

The following parameters were introduced in the command output:

  • Frame Bursting Mode
  • RTS Mode

show crypto isakmp

The show crypto isakmp stats command was updated to display the number of VIA VPN sessions initiated beyond the assigned limit.

show aaa state debug-statistics

The show aaa state debug-statistics command was updated to display the number of VIA VPN sessions initiated beyond the assigned limit.

show ap bss-table

The show ap bss-table command output was modified to include the following flags:

  • z = WPA3-AES-CCM128 BSS

  • Z = WPA3-AES-CCM128 BSS with transition mode