ap gap-db

ap gap-db

[reinit-

resync lms {lms-ip <lms-ip>}|{lms-ip6 <lms-ip6>} [{ap-name <ap-name>|{wired-mac <wired-mac>}]

Description

Resynchronize an AP status on a managed device and Mobility Conductor.

A managed device sends AP status messages about the APs terminating on that managed device to Mobility Conductor. In the event that an AP state appears to be different between Mobility Conductor and the managed device, this command will resynchronize the AP status information by allowing the managed device and Mobility Conductor to exchange a list of APs.

Parameter	Description
reinit-db	Re-initialize GAP DB.
resync	Trigger a re-sync.
lms	Specify the managed device to be synchronized.
lms-ip <lms-ip> lms-ip6 <lms-ip6>	Synchronize the status of all APs terminating on the specified Managed device. Specify either the IPv4 address or the IPv6 address of the managed device.
ap-name <ap-name>	Synchronize only the AP with the specified AP name.
wired-mac <wired-mac>	Synchronize only the AP with the specified MAC address.

Example

The following command triggers a resynchronization for an IPv4 address of the managed device.

Command History

Release	Modification
AOS 8.9.0.0	All instances of master have been replaced with conductor.
AOS 8.0.0.0	Command introduced.

Command Information

Platforms	License	Command Mode
All platforms	Base operating system.	Enable mode on Mobility Conductor.