iot radio-profile <profile-name>
ble-console {dynamic|off|on}
ble-opmode {beaconing|scanning}
ble-txpower <ble-txpower>
clone <source>
no
radio-instance {external | internal}
radio-mode {ble | zigbee}
zigbee-channel {auto|11|12|13|14|15|16|17|18|19|20|21|22|23|24|25|26}
zigbee-opmode coordinator
Description
This command configures or modifies an IoT radio profile.
|
Parameter |
Description |
|
ble-console |
Set the BLE console mode. |
|
ble-opmode |
Set the BLE operation mode. |
|
ble-txpower |
Set the BLE transmission power in dBm. |
|
clone |
Copy data from another IoT radio profile. |
|
no… |
Removes any existing configuration. |
|
radio-instance |
Enables external or internal radio instance. |
|
radio-mode |
Enables BLE or ZigBee radio mode. |
|
zigbee-channel |
Set the ZigBee scanning channel. |
|
zigbee-opmode |
Set the ZigBee coordinator operation mode. |
Example
The following example configures an IoT transport profile.
(host) [mynode] (config) #iot radio-profile Sample-Zigbee
(host) [mynode] (IoT Radio Profile "Sample-Zigbee") #radio-mode zigbee
(host) [mynode] (IoT Radio Profile "Sample-Zigbee") #zigbee-channel auto
(host) [mynode] (IoT Radio Profile "Sample-Zigbee") #zigbee-opmode coordinator
Related Commands
|
Command |
Description |
|
Shows the IoT radio profile status. |
Command History
|
Version |
Modification |
|
ArubaOS 8.6.0.0 |
The following parameters were removed:
The following parameters were introduced:
|
|
ArubaOS 8.4.0.0 |
Command introduced |
Command Information
|
Platforms |
License |
Command Mode |
|
All platforms |
Base operating system. |
Configuration IoT Data Profile Mode (config-submode). |
