rf dot11-60GHz-radio-profile

rf dot11-60GHz-radio-profile <profile>

channel

clone

no

Description

This command configures AP radio settings for the 60 GHz frequency band on a 802.11 60 GHz radio profile. Channels must be valid for the country configured in the AP regulatory domain profile (see ap regulatory-domain-profile on page 1). To view the supported channels, use the show ap allowed-channels command.

Parameter	Description
channel	Indicates the radio channel. Range: 0-3 Default: 2 NOTE: Channel 1 is not recommended due to EIRP limitations.
clone	Copies data from a different 802.11 60 GHz radio profile.
no	Disables the 802.11 60 GHz radio profile configuration.

Examples

The following command configures APs for the selected 802.11 60 GHz radio profile named "default".

Command History

Release	Modification
ArubaOS 8.4.0.0	Command introduced.

Command Information

Platforms	License	Command Mode
All platforms	Base operating system.	Config mode on Mobility Conductor.