rf optimization-profile

rf optimization-profile <profile-name>

clone <profile>

handoff-assist

low-rssi-threshold <number>

no ...

rssi-check-frequency <number>

rssi-falloff-wait-time <number>

Description

This command configures the RF optimization profile.

Parameter	Description
<profile-name>	Name of this instance of the profile. The name must be 1-63 characters. Default: default
clone	Name of an existing optimization profile from which parameter values are copied.
handoff-assist	Allows the controller to force a client off an AP when the RSSI drops below a defined minimum threshold. Default: disabled
low-rssi-threshold	Minimum RSSI, above which deauth should never be sent. Range: 1-255 Default: 10
no	Negates any configured parameter.
rssi-check-frequency	Interval, in seconds, to sample RSSI. Range: 9-255 seconds Default: 3 seconds
rssi-falloff-wait-time <number>	Number of times the detected client RSSI level must fall below the minimum RSSI threshold the before the AP sends a deauthorization message to the client. The maximum value is 8 times. Range: 0-8 Default: 4

Example

The following command configures an RF optimization profile:

Command History

Release	Modification
ArubaOS 8.0.0.0	Command introduced.

Command Information

Platforms	License	Command Mode
All platforms	Base operating system.	Config mode on Mobility Conductor.