show ap power-mgmt-statistics {ap-name <ap-name> | ip-addr <ip-addr> | ip6-addr <ip6-addr>}
Description
This command shows the power status statistics of an AP connected to a managed device. Issue this command to get power status statistics of an AP connected to a managed device.
|
Parameter |
Description |
|
ap-name <ap-name> |
Shows the statistics of the specified AP name. |
|
ip-addr <ip-addr> |
Shows the specified IP address. |
|
ip6-addr <ip6-addr> |
Shows the specified IPv6 address. |
Example
The following example shows the power statistics of an AP connected to a managed device:
(host) #show ap power-mgmt-statistics ap-name 00:4e:35:c4:47:06
AP Power Mgmt Status, Last update at 2019-09-26 16:43:13
--------------------------------------------------------
Attr Value
---- -----
LLDP Granted Power Eth 0: 23.3 Eth 1: 23.3
LLDP Request Power Eth 0: 23.3 Eth 1: 23.3
Temperature Highest temperature: 52°C, Lowest temperature: 48°C, Current temperature: 50°C
Power Supply POE-AT
USB Status USB Knob: Auto, USB Status: Disabled
PSE Status N.A.
ETH Status Eth 0:Enabled. Eth 1:Disabled.
G-radio Chain 4*4
G-radio Enable Enabled
G-radio Power Full Power
A-radio Chain 4*4
A-radio Enable Enabled
A-radio Power Full Power
CPU Throttle 100%
Power Consumption 7.6W
IPM Enable Disabled
ITM Status Thermal Standby
Command History
|
Release |
Modification |
|
ArubaOS 8.7.0.0 |
The |
|
ArubaOS 8.6.0.0 |
Command introduced. |
Command Information
|
Platforms |
License |
Command Mode |
|
530 Series and 550 Series access points |
Base operating system. |
Enable or Config mode on the managed device or controller where the AP terminates. |
