show log arm-user-debug

show log arm-user-debug{[<number>][all]}

Description

Show the controller’s ARM user debug logs.

Parameter

Description

<number>

Start displaying the log output from the specified number of lines from the end of the log.

all

Shows all the ARM user debug logs for the controller.

Example

This example shows the controller’s last ten ARM user debug logs.

(host)[node] #show log arm-user-debug 10

Aug 12 16:03:03 :508164: <DBUG> |ARM Process| Client Match: Found 11v Capable STA b0:ee:45:49:60:3c

Aug 12 16:03:03 :508201: <DBUG> |ARM Process| Client Match: Sending BSS transition req to client b0:ee:45:49:60:3c token 14

Aug 12 16:03:03 :508202: <DBUG> |ARM Process| Client Match: Timer started for BTM response STA b0:ee:45:49:60:3c timerid 5176652

Aug 12 16:03:06 :508161: <DBUG> |ARM Process| Client Match Received probe report: AP 6c:f3:7f:e7:1d:20 ESSID sganu-wpa2-psk Assoc ESSID sganu-wpa2-psk for client b0:ee:45:49:60:3c with signal -44

Aug 12 16:03:06 :508161: <DBUG> |ARM Process| Client Match Received probe report: AP d8:c7:c8:46:e0:00 ESSID sganu-wpa2-psk Assoc ESSID sganu-wpa2-psk for client b0:ee:45:49:60:3c with signal -38

Aug 12 16:03:06 :508161: <DBUG> |ARM Process| Client Match Received probe report: AP 6c:f3:7f:e7:1d:20 ESSID sganu-wpa2-psk Assoc ESSID sganu-wpa2-psk for client b0:ee:45:49:60:3c with signal -35

Aug 12 16:03:11 :508161: <DBUG> |ARM Process| Client Match Received probe report: AP d8:c7:c8:46:e0:00 ESSID sganu-wpa2-psk Assoc ESSID sganu-wpa2-psk for client b0:ee:45:49:60:3c with signal -36

Aug 12 16:03:13 :508203: <DBUG> |ARM Process| Client Match: Timer cleared for BTM response STA b0:ee:45:49:60:3c timerid 5176652

Aug 12 16:03:13 :508186: <DBUG> |ARM Process| Client Match: Tracking unsuccessful failure for client b0:ee:45:49:60:3c num fails 0 btm rejects 0 btm timeouts 4

Aug 12 16:03:13 :508185: <DBUG> |ARM Process| Client Match: move status: Uncontrolled-Radio complete move for client b0:ee:45:49:60:3c from Source AP ap135 d8:c7:c8:46:e0:00 Eff_Signal -0 dBm (Signal -0 dBm EIRP 0 dBm) to Target AP ac 6c:f3:7f:e7:1d:20 Eff_Signal -0 dBm (Signal -0 dBm EIRP 0 dBm) Actual AP ap135 d8:c7:c8:46:e0:00 Time diff 9 Reason Denied; User action

Command History

Release

Modification

ArubaOS 8.0.0.0

Command Introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Enable or Config mode on Mobility Conductor.