show log peer-debug

show log peer-debug{[<number>][all]}

Description

Show the peer-debug logs.

Parameter

Description

<number>

Start displaying the log output from the specified number of lines from the end of the log.

all

Shows all the AP debug logs for the controller.

Example

This example shows the ten most recent AP debug logs for the controller.

(host)[node] #show peer-debug log 10

 

Nov 24 20:54:24 KERNEL(AP39@10.6.1.21): Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved

Nov 24 20:54:24 KERNEL(AP39@10.6.1.21): wifi0: Base BSSID 00:1a:1e:25:97:d0, 16 available BSSID(s)

Nov 24 20:54:24 KERNEL(AP39@10.6.1.21): edev->dev_addr=00:1a:1e:ca:59:7c

Nov 24 20:54:24 KERNEL(AP39@10.6.1.21): wifi1: Base BSSID 00:1a:1e:25:97:c0, 16 available BSSID(s)

Nov 24 20:54:24 KERNEL(AP39@10.6.1.21): edev->dev_addr=00:1a:1e:ca:59:7c

Nov 24 20:54:24 KERNEL(AP39@10.6.1.21): ^H<6>Ethernet Channel Bonding Driver: v3.0.1 (January 9, 2006)

Nov 24 20:54:24 KERNEL(AP39@10.6.1.21): secure_jack_link_state_change: Error finding device eth0

Nov 24 20:54:25 KERNEL(AP39@10.6.1.21): Kernel watchdog refresh ended.

Related Commands

Command

Description

logging

Use this command to specify the IP address of the remote logging server, facility, severity, and the type.

logging-trace-files

The slog_flash application continuously updates log files to the USB storage. An error occurs when the USB storage is removed when the update is in progress. This command is introduced to prompt the user before removing the external USB, to avoid this error.

Command History

Release

Modification

ArubaOS 8.7.0.0

Command Introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Enable or Config mode on Mobility Conductor.