show log

show log

all

ap-debug

arm

arm-user-debug

errorlog

network

peer-debug

security

system

user

user-debug

wireless [<number>]

Description

Show the log files on Mobility Conductor or a managed device.

Parameter	Description
all	Issue the command show log all to display all log files. Include this parameter after one of the log file types (for example, show log security all) to display all log files of the selected type.
ap-debug	Display AP debug log files.
arm	Display ARM log files.
arm-user-debug	Display ARM user debug log files.
errorlog	Display error log files.
network	Display network log files.
peer-debug	Display peer debug log files.
security	Display security log files.
system	Display system log files.
user	Display user log files.
user-debug	Display user debug log files.
wireless <number>	Display wireless log files. Include this parameter at the end of the show log command to start displaying the log output from the specified number of lines from the end of the log.

Related Commands

Command	Description
logging	Use this command to specify the IP address of the remote logging server, facility, severity, and the type.
logging-trace-files	The slog_flash application continuously updates log files to the USB storage. An error occurs when the USB storage is removed when the update is in progress. This command is introduced to prompt the user before removing the external USB, to avoid this error.

Command History

Version	Description
AOS 8.0.0.0	Command introduced.

Command Information

Platforms	License	Command Mode
All platforms	Base operating system.	Enable or Configuration mode on Mobility Conductor.