Eduroam Service Template
This template is designed for the following scenarios:
Local campus users connecting to eduroam from the local wireless network.
Roaming users from an eduroam campus connecting to their campus network.
Roaming users connecting from a local campus or other campuses that are part of the eduroam federation.
To access the Eduroam service template:
1. Navigate to Configuration > Service Templates & Wizards.
2. From the Service Templates & Wizards page, select Eduroam. The Service Templates - Eduroam page opens to the General tab.
Figure 1 Eduroam Service Template
Specify the parameters used in the Eduroam service template as described in the following table:
Table 1: Eduroam Service Template Parameters
Parameter
|
Action/Description
|
General
|
Select Prefix
|
Select a prefix from the existing list of prefixes.
This populates the pre-configured information in the Authentication, Service Rule, Wireless, andFederation Level Radius Server (FLR) tabs. The Name Prefix field is not editable.
|
Name Prefix
|
Enter a prefix that you want to append to services using this template.
Use this to identify services that use templates.
|
Service Rule
|
Enter domain details
|
Enter the domain name of the network.
For example, @edunet.ucla.com. This field is mandatory.
|
Select Vendor
|
Select the vendor of the network device. This field is mandatory.
|
Authentication
|
Select
|
Select an authentication source from the list, the information updated in the Authentication, Wireless, and Federation Level Radius Server (FLR) tabs are auto-populated.
|
Name
|
Enter the hostname or the IP address of the server. This field is mandatory.
|
Description
|
Enter a description that helps you identify the characteristics of this template. This field is mandatory.
|
Server
|
Enter the host name or the IP address of the server. This field is mandatory.
|
Identity
|
Enter the Distinguished Name () of the administrator account. This field is mandatory.
|
|
Enter the server domain name. This field is mandatory.
|
Base
|
Enter the Distinguished Name () of the administrator account. This field is mandatory.
|
Password
|
Enter the account password. This field is mandatory.
|
Port
|
Enter the port where the server is listening for a connection. This field is mandatory.
|
Wireless Network Settings
|
Select wireless controller
|
Select a wireless controller from the drop-down list.
|
Wireless controller name
|
Enter the name given to the wireless controller.
|
Controller IP Address
|
Enter the IP address of the wireless controller.
|
Vendor Name
|
Select the manufacturer of the wireless controller.
|
Shared Secret
|
Enter the shared secret that is configured on the controllerand inside Policy Manager to send and receive requests.
|
Enable
|
Select to enable initiated on the network device.
|
Port
|
Specifies the default port 3799 if is enabled. Change this value only if you defined a custom port on the network device.
|
Federation Level Server (FLR)
|
Host Name
|
Enter the host name of the federation server.
|
IP Address |
Enter the IP address of the federation server. |
Vendor Name
|
Select the manufacturer of the wireless controller.
|
Shared Secret
|
Enter the shared secret that is configured on the controllerand inside Policy Manager to send and receive requests.
|
Enable
|
Select to enable initiated on the network device.
|
Port
|
Specifies the default port 3799 if is enabled.
NOTE: Change this value only if you defined a custom port on the network device.
|
Authentication Port
|
Enter the port number for the Authentication Port.
|
Accounting Port
|
Enter the port number for the Accounting Port.
|