upgrade-image

upgrade-image <url>

upgrade-image2 <url>

upgrade-image2-no-reboot

Description

These commands allow you to upgrade an IAP to use a new image file.

Syntax

Parameter	Description
upgrade-image	Upgrades the IAP to use a new image.
upgrade-image2	Uploads an additional image file and upgrades the IAP to use this image file when required.
upgrade-image2-no-reboot	Uploads an additional image file and upgrades the IAP to use the new image without rebooting the IAPs.
<url>	Allows you to specify the FTP, TFTP, or HTTP URL.

Usage Guidelines

Use these commands to upgrade n IAP to use an image file uploaded from the FTP or TFTP server, or by using an HTTP URL. Before uploading an image file, ensure that you have the appropriate image file for your IAP. The following examples describe the image class for different IAP models:

l

For IAP‑134/135—ArubaInstant_Cassiopeia_<build-version>

l

For RAP-108/109 and IAP-114/115—ArubaInstant_Pegasus_<build-version>

l

For RAP-155/155P—ArubaInstant_Aries_<build-version>

l

For IAP-224/255—ArubaInstant_Centaurus_<build-version>

l

For all other IAPs —ArubaInstant_Orion_<build-version>

Example

The following examples upgrade an IAP by using an image file from the FTP server:

(Instant Access Point)# upgrade-image ftp://192.0.2.7/Aruba_Orion_6.2.1.0-4.0.0.0_xxxx

(Instant Access Point)# upgrade-image2-no-reboot ftp://192.0.2.7/Aruba_Orion_6.2.1.0-4.0.0.0_xxxx

Command History

Version	Description
Aruba Instant 6.2.1.0-3.3	These commands are introduced.

Command Information

IAP Platform	Command Mode
All platforms	Privileged EXEC mode.