You are here: Managing IAPs > Resetting a Remote AP or Campus AP to an IAP
Previous TopicNext Topic

Resetting a Remote AP or Campus AP to an IAP

The reset button located on the rear of an IAP can be used to reset the IAP to factory default settings.

To reset an IAP, perform the following steps:

1. Power off the IAP.
2. Press and hold the reset button using a small and narrow object such as a paperclip.
3. Power on the IAP without releasing the reset button. The power LED flashes within 5 seconds indicating that the reset is completed.
4. Release the reset button. The IAP reboots with the factory default settings.

 

All APs have a reset button, except IAP‑175P/175AC. Contact Aruba support for resetting these IAPs.